maintenance / troubleshooting

Hey Everyone, I'm looking for some options for an exhaust setup that will allow more clearance. I have the stock setup and have already squashed it on top of a rock and now it's got a flat spot. I would like a set up that relocates the exhaust someway to provide more clearance. Any suggestions?

Hey team gonna tackle the ECGS bushing install soon but got some questions before I commit. I received bushing with a dent on the drive end, will it be ok? Is it supposed to have a line (journal) for some reason? Also I have MT, and the the bushing states 2005+ Tacoma, are they all the same?

Hello, I currently have the Bilstein 5100 Rear Shocks and I'm considering buying a camper shell for my long bed. I do a bit of off-road adventures and want to make sure to maintain rear height for clearance. If anyone with experience on this matter could provide some guidance that would be...

Hoping somebody here can help or has some insight. This morning I noticed my passenger side floor mat was holding water after last nights rain. The trucked was parked outside and not driven during the storm. Upon further investigation I found the water to be dripping from the HVAC fan and also...

I’ve had my Taco for about a month now and I’m having a problem with entune dropping calls. It’s happening about 75% of the time. I’ll attempt to make a call using entune and as the call is going through, the system will freeze and then completely restart. Has anyone else had this issue and is...

I have a 2018 6 in pro comp lift on 35s and I did a U turn the other day and my pre collision system malfunction light came on my dash and I talked to corporate to see if it can be adjusted to fit my lift and they said yes but no dealership in my area (Jax,FL) will do it any suggestions on how...

I asked this on TW and go no responses, maybe somebody here has something to say. As seen in the pic I have replaced the standard trd4x4 bed sticker. That one was a full rectangular all one sticker, the new one, as are most I see people using, all separate lettering. Each little black line and...

Hey guys and gals, I love my 2016 TRD Sport 4x4 Long Bed but have an issue i'm looking for some help on. One morning when putting it into reverse it was louder than usual. It was approx 25 degrees F. Then I noticed a new sound coming from the front while in 4wd high. If it is switched to 2wd...

Any help with an anytime rear camera? Did an online search and could not find a kit availible. Appreciate any info. Thanks.

I recently installed a pop and lock to auto lock my tailgate with the auto lock system. It is pretty loud when it locks and unlocks. I was wondering if anyone has had any luck with any type of insulation to help quiet the noise.

So, that's odd. Was going to go exploring out in the woods today and once I got myself and the big dog loaded...dang thing wouldn't turn over. The battery is the one that came with it but I hadn't noticed any issues up until now. It's on the charger. It was reading at 2% I assume it got drained...

I tried the search option but with no success. I was wondering what fluid I should top Up my diff after the ECGS bushing. Have read it all on the google machine with mixed results. Am I better to go to Toyota drink the koolaide and get it from them for compatibility? I have such low mileage no...

Hey I’m a new 2019 TRD OR owner and on a few instances I’ve had issues taking off from a dead stop on a hill. It almost feels like ABS kicking on if I hold the gas on it powers thru and takes me up the hill. Also it never actually holds my truck on a hill it will coast back every time I take my...

I'm an idiot and ran my sliders for way too long without painting them. I always claimed I didn't mind the surface rust, thought the raw look was kinda cool, and it would be no big deal to remove the rust and paint when the time comes. Well, no, I'm just lazy and I got what I deserve. Trying...

2018 has been great for my truck...perhaps not for my bank account lol. Added: -Canopy -Full prinsu (cab and canopy) -Steel bolt on sliders -Tepui awnings (2x5') -Method NV 16" Wheels - 265/75/R16 E rated K02's (usually load it up with mtb, surfboards, gear etc) With the addition of the canopy...

Has anyone ever ordered factory paint for touch ups or to match things for your rig? If so did you contact Toyota or?

i had a shop tell me they couldnt level my truck out 3 inches because it would mess with the TSS. Has anyone found a way around this? Only with the 2019 tacomoas.

Anyone know any youtube videos how to remove the front lower panel I've looked and no luck thanks in advance. I want to have it painted or wrapped in black. Wondering if you have to remove the whole front grill or just snap it off? thx

In case you guys wanted to know more about it

Hey everyone, Wanted to hear from y’all who own hi-lifts what you view are the pros and cons of this age old product. It’s been around for so long and I am actively looking for a solution for offroad recovery/jacking if need be (hopefully never). Thank you!

So I got my update today removing Pandora, Facebook and that reservations system thing. I never used them so I'm not really feeling a loss but those were selling points for the truck and now they are no longer part of it. I find that irritating. Not nearly as irritating as a voice control system...

So we've now had multiple instances in 4wd where we experienced some strange behaviors. The first is what seems to be a significant power loss under certain conditions. No not the standard anemic 3.5 stuff. Scenario: Vehicle on a slight decline with the front wheels in a sort of a...

Does anyone know if disconnected battery for 30 mins will clear engine light? Someone fueled up my truck and never tightened gas cap and when it got to 1/4 tank the light came on. If it clears it but comes back on I’ll try and book it in. Only reason I ask is, it’s like pulling teeth to get an...

Morning all, I have the stock new 2018 trd sport, I tow a few trailers w boats only a few times per year, but they def lower the back a bit with the tongue wait. The lightest is an ATV trailer, then about 4k trailer/boat, about 6k boat/trailer but only a few miles from dock to ramp, going very...

Hi everyone, need some help I took my Tacoma to the dealership this week for the tsb to get done, initially i went in for tsb 62-18, i told the gentleman that it was hunting for gear and it was terrible to drive, so five hours later he calls me and tells me that they flash the computer that it’s...

Curious if anyone owns a ESAB machine and what you think about it? I'm about to pull the trigger on an ESAB 235ic EMP. only thing holding me back is it's not as big of a name like Miller. Sweedish design and built in one of the Carolinas. I've done allot of research an it seems like a good buy...

I had a few requests on how I mounted the Pelican case. Costs only a few bucks for hardware but more intestinal fortitude to drill your case.

Has anyone had any issues with having to re calibrate their TSS system after getting a lift? I'm getting a lift here soon to include a pro grille and wanted to see if anyone had any issues with still getting it to work. Thanks!

Hi guys, i recently installed my genesis dual battery kit and put in the batteries... Had a couple questions, and maybe some of the other people here who have installed this in the past can help... the truck seems to be making noise coming from the batteries now, like something is loose, i...

See title

got icon rxt leafs to replace my sagging stock leafs. Got everything back together, went for a test drive and and the truck is pulling to the left. Now where did I mess up? thanks in advance for any info!

Okay guys, Got something I’m trying to figure out. My truck sits very level right now in its current stance with an RTT and bed rack carried at all times. I am receiving a high clearance rear with swingout/tire carrier and front bumper with full bars from C4 to build the show truck for T3G...

https://eastcoastgearsupply.com/i-8536125-toyota-8-clamshell-bushing-eliminates-needle-bearing.html For those that have done it, did you use their tools? If not, how was your luck without them? And did you have to replace the axle seal? Trying to avoid buying what I might not need. Thanks.

Don’t mean to hurt anyone’s feelings with this, but a front bumper is on the bottom of my priorities. Right now I’m looking to get a rear high clearance bumper and then regear to 5.29 with a front locker. That being said, I already have a winch and am looking at my mounting options. Since I...

Does anybody know how many recalls or is there any recalls or any concerning one For the trucks ?? Thanks in advance

http://www.exploringoverland.com/overland-tech-travel/2016/3/25/3izopxom72k7p3vxpvjtfuhk7ouscc So I've been trying to chase down a slow air leak in my airbag system. Ive sprayed the lines, fittings and bags with soapy water with no luck. Last week I used my my arb compressor to add some air to...

So, I've just recently lifted my truck with a Fabtech 6 inch lift, and put the truck on 35s. Now I have to regear and I'm kind of lost as to what I need to do. I know the stock gear ratio is 3.73, and thats about it. I've heard from several people that I need to go with a gear ratio anywhere...

So, Friday, I was just driving to pick my wife is from work and my truck literally crapped out on me... Just died in the middle of the road while driving 35mph. It stuttered real bad and then just died. The HUD display came up all red and said Transmission oil temperature high! I had to tow the...

Lookin for some help. I’ve installed rocklights and fog lights (a couple weeks between each install) and they have both stopped working, I checked the fuses and they are good, and I don’t have any battery issues. Some input would be great before I strip the wires out.. haha

Is anyone running one in their truck and if so how do you like it pros and cons?

Hey guys, What are you all doing with your wheel wells and liners? To those who have beaten the pinch weld down etc are you keeping the liner in and using a heat gun to flex it, are you cutting parts of the liner away, using spray rubberized liner?

I recently installed a bed rack/RTT setup, and am curious what I should do. I currently have a 1" spacer block in the rear on stock leafs, and my leaf springs were already sagging bad before the additional weight was added. Should I add the Icon 3-leaf mini pack on top of my spacer? Or should I...

Many times when turning off the truck the lights do not automatically until after 10 minutes in the evening. I took it to the dealer and they said it worked fine. Their words were: - you have to have the door closed when the truck is turned off - they wont go off by locking with the handle...

I have yet to find one of these posts on T3G. If there is already a similar thread please lock this one and disregard. Most of us are still going to require the need for a good dealership, service writer, or tech for the near future. If you have had good experiences with a particular...

When is a diff drop required/needed?

Anyone else had the Driver air bag light come on their truck? Mine has been on and off since around 2k miles. Right now my truck is at the dealership (Since 8/7/18) and they still can't dial in on the problem. Just curious. I've only know of 3 cases(nation wide) including mine that has had this...

What’s the scoop with this new TSB update that’s supposed to fix gear selection/shifting? Has anyone here did this update and if so, notice anything? Thanks!

I have a 2018 off road 4x4. How can I eliminate the lag between 1st and 2nd gear when I’m using the 4x4 trying to go fast but the lag affects a lot...

I've been on the verge of ordering the twin ARB + EXE bedside mount for a couple of weeks. See this thread for install on said setup: https://tacoma3g.com/threads/expedition-essentials-arb-dual-compressor-bed-mount-kit.632/ I've read a few threads on TW, and watched a few other videos on the...

Hey guys so I have a rattling noise when I’m in drive at a stop. It only is when I’m in drive and then accelerating past 2k and sorta when I turn. It’s a loud noise but doesn’t do it all the time. I’ve checked all my skids and they are torqued down so I’m sorta lost

It's grounded on the frame and the on the bolt in the front passenger seat. I tried the VR6 adjustment and no good. When the Antenna is disconnected, I don't get the warning message when I hold down the mic button. When I plug in the Antenna and push the mic I get the warning.

Hey all, so who has upgraded their bump stops, front or back and why? Should this be considered, pros/cons? Thanks

Hows it going all! This is the problem I'm having, every time I go over a small lip or divet in the road ie : a drive way lip , a bridges block seam, a small pot hole. Front goes over fine then when my rear goes over I hear a chirp ... just one Setup icon stage 4 Aiftlift bags Is this...

Posted this on TW as well. Today I knoticed a rather good sized dent in the roof of my Truck and some clear coat missing. I have no clue where or how this dent came to be. I called a PDR shop they want 300 bucks to fix the dent with out fixing the paint. Any one know of a link of how to drop...

It looks like our Tacoma beds aren’t very sturdy. Are we asking for trouble adding weight to the rails? If so, should the tent/accessories be tied into the bed mounts?

It's not as bad as it sounds, but still could've been in serious trouble. Sorry for the long story, but I would appreciate the help! I went on a group run with some Phoenix guys to Box Canyon in Wickenburg, AZ. If you have heard anything about the trail, it's short, but has LOTS of water to play...

Since installing the larger tires and my brakes squealing like a pig I am looking for suggestions on rotors and pads or just pads. Never really looked at brakes for the taco as oem has done well but with the added weight of everything I have now I think I need more stopping power.

I'm about to have the exhaust re-route done. Does anyone have any lessons learned from doing this? Something I should be concerned with?

i woke up this morning and drove my truck, it was fine and i wake up again and decide to.ger a haircut.. I noticed the 4x4 light is blinking and I go to engage it in Park to 4Hi and it wont shift over. then i pop into N and go to 4lo and wont go either.. I have a 3500 miles to drive.. has...

Just throwing this out there lol. I thought my 4.88’s were overkill. Not my cup of tea but nonetheless a new option

Ok, so just ordered @Pelfreybilt battery cage so that I can run a group 31 agm battery. I have a Goal Zero Yeti 400 lithium power bank and I am going to be buying a 100w solar panel from Goal Zero as well. So to stop rambling and get to my question! I am going to be purchasing a ARB 63qt fridge...

I’m going with OME suspension with 255/85r16 tires. Do I have to replace the UCA’s?

Who is running without the front sway on the daily. The benifits offroad are obvious. Ive been contemplating taking mine off but this is my daily driver. How is the handling without it? Does thr front end float at speed? Cornering?

Hey guys, making this thread primarily because of a lack of available information regarding 4.88 gears for the 3rd gens. Hopefully you guys find this thread useful. I made the change a bit over a year ago and wanted to gather as much data as possible in order to determine the true benefits...

Ok everybody, I understand what it is and why to do it. My question is to those that have done it or are looking to, did u DIY or will a shop do it? I don’t have a welder so I can’t weld a plate back on. I’m in Arizona, will a local shop know what a Tacoma CMC is and be able to cut and weld...

Installed and wired my ARB dual A little video I took of it operational on my instagram, feel free to take a look and let me know what you think. taco_primo https://expeditionessentials.com/ Bed mount kit with extended wire harness. Vixen air 3 gallon aluminum tank ARB QD with...

Ok window lickers... who else is running 35s? or plan to???! i've got my Duratracs in the garage and going to test fit them when i get a chance to!!

Alright guys. Which wire is the remote wire. I was lead to believe the factory unit has RCA jacks in the back but they don't. So I got the TacoTunes harness and it doesn't come with a remote wire.

I have had a catalytic converter stolen off of my vehicle in the past. Are 3rd gens still being targeted? what products are available to prevent this?

I run negative offset wheels. I plan on having to replace my wheel bearings at some point and see it easier to replace the whole assembly instead of taking it to a press. Question is: why are 4x4 assemblies cheaper than 4x2 assemblies?

I want to come up with a way to mount my fishing rods on the bed rails when im cruising the beach. Don't have a welder so thats out for a DIY but any ideas?

Hi I was wondering if anyone has any experience with increasing the tongue weight on the 3rd gens?

Has anyone else run into the issue of their AC drain getting clogged up? I started noticing a foul odor coming from my dash vents whenever I have the ac on, and decided to investigate it today as I was getting ready to do the ac drain mod. I started my truck and cranked the ac to full blast and...

It was requested that I post about this, but I don't have pictures right now so I'm going to describe it as best I can. The power for this USB is on a relay'd circuit controlled by the ignition so that it is only on when the car is on. The product recommended...

Looking at the oilfilter its unreachable with my new skids on. Do I need to drop this before going to Toyota for oilchange?

The dealership tried telling me it was the roof rack that was leaking and they weren't going to replace the water stains because I installed the roof rack. I went through hell proving them they were wrong.

Has anyone had any luck with installing the auto all windows up/down with the fob?

I liked the clean look of the aftermarket underhood fuse panels but couldn't justify the cost that some are charging for it so I made my own from clear acrylic sheet. Started with an 18"x24" acrylic panel from Home Depot I cut off a 9"x12" piece and used a heat gun, vise, and a couple of...

Post up your pics of your double battery set ups. Curious how everyone has theirs set up.

How do you delete the gas and break being pushed together deleted so I could do a burnout or get sideways and have fun??

For all you 6MT guys out there that is experiencing a noisy/creaking clutch, the fix is to yank the pin at the pedal and cover it in grease. They can't just get some spray in there. It must be removed and greased up.

This video works for LED/HID upgrades or just to replace oem if the bulb blew.

Another popular vid of mine. It's really long and I apologize for the music. I was a noob at video editing. You can mute the volume and turn on closed captioning by tapping CC on the bottom right of the screen for dialogue. First vid is for total noobs. 2nd is my latest with some MotiveX tools...

This works for either reason. The taillight sometimes feels stuck. As long as you yank it straight rearward... You're good to go.

A Quick review of Husky X-act Contour floor liners compared to Toyota All weather mats. Just received our Husky floor mats, Very impressed. The fit is excellent, extended coverage and they come with a floor anchor for the passenger side for us 2016/2017 owners who have the ever creeping...

All, I have a '17 TRD OR DC LB with a stock suspension. I have a decked drawer system, and just installed a ARE shell. With that added weight, a full tank of gas, basic recovery gear and other stuff that never leaves my truck, it sits about level right now. I will be doing a lot of camping this...

SAFARI SNORKEL INSTALL GUIDE This is a step-by-step guide on installing a Safari Snorkel on a 3rd Gen Tacoma. The installation is pretty straight forward for the most part, if your handy with tools you shouldn't have any issues installing this unit. Tools and supplies needed: *10mm...

Anyone flush their diffs? I know a lot of people say theirs weren’t even full or had a ridiculous amount of shavings in there.

Looking for a HI-lift slider adapter. I know there are some on amazon and other forums but I don't feel the one on amazon is worth the 65$ they are asking.

Let's see your recovery gear! I'm a member of a local facebook page where people can post if they need a tug, and posts come in almost daily which is to be expected since I live in a desert (El Paso) and so there's plenty of land to explore and get stuck in. Anyway. I keep with me my gear...

I'm coming up on my 10,000 maintenance mark, and it has me thinking... I know I changed my oil and 2,500 and then again at 5,000 (I know, I know), but I don't remember if I used Mobil 1 synthetic like I do for everything, or if I used Toyota's oil. I've never brought my truck into Toyota for...