overland gear

Good Morning everyone, So my project is to black out my truck, almost close for it to be mostly black. My question is, which headlights should i get? All of them looks good to me. I really like the BHLM but i also like the aggresive look of the Spyder and the Anzo. But both Spyder and Anzo...

I'm interested in getting some opinions here. I'm in the early stages of finding a bed rack and I find myself gravitating to a couple of options. Anyone have any experience with the Yakima Overhaul HD Rack? I'm contemplating over getting a Overhaul HD (Yes I understand it's not really even a...

View: https://www.youtube.com/watch?v=gTO9TWXsBbU TL;DW: It's easy unless you fuck up the Torx, then it turns out vice-grips are a viable alternative.

Kb Voodoo Max Modular 18” I’ve got to say I'm falling in love with this thing. I recently bought a brand new CVT tent too and wow I love it!

Opinions...best fitting, easy install and very little to no leaking tri-fold (hard) tonneau cover for 2019 Tacoma or 5' bed. Bakflip, gator others?

First off, I didn’t take enough pics, but if you have questions feel free to ask. You can purchase this snorkel kit for $285 shipped from solflobumpers. -First off, I took the included template and masking taped it to the truck. *note the front and top of template. The front where it will...

So I did a thing and I figure I would share with you all incase anyone has been interested in doing the same. I wanted a way to mount gear (rotopax, shovel and tredpro traction boards) on the side of my ARE shell. Something similar to bed racks but I want the option to keep additional gear dust...

So I did a thing and I figure I would share with you all incase anyone has been interested in doing the same. I wanted a way to mount gear (rotopax, shovel and tredpro traction boards) on the side of my ARE shell. Something similar to bed racks but I want the option to keep additional gear dust...

View: https://www.youtube.com/watch?v=-cstYbvz8-Q Spoilers: (because I'm, not going to force you to watch a video you don't want to see) 2 minutes to setup, 5 minutes to break down.

Which phone mount did you all use? I’d like to avoid putting one on my dash if I could. And the vent magnets don’t seem like they would work due to the design of the vents. Need some advice. Thanks in Advance

I have been working on putting together a tool bag to keep in my truck. I wanted to start a thread to see what everyone carries on the trail as far as tools go, i.e. sizes of everything, odd and end tools, specialty tools etc.. My tool box in my garage has everything you could need for working...

I bought some XBull boards off eBay the other day and they got me for a foreign transaction fee just as a heads up for anyone who might be wanting some. I figured I’d get cheap one just in case since I don’t really off-road hard

Hello friends. So, I just got a canopy a couple weeks ago and I was going to head out to the dunes but I can't use my bed mounted whip flag mount anymore. I was looking at something like this: https://www.amazon.com/dp/B07DKSX7R9/?tag=tacoma3g-20 But I don't know if it uses the same mount...

I've been doing a little bit of research on light placement on our trucks, or just any off-road vehicle in general, but a majority of websites seem to be saying the same information, worded the same, over and over and without some experience. The reason I'm asking is to see if all you more...

Finally received my Morimoto headlights. If y'all want the new 2020 Tacoma style headlights but better, Y'all need a set of these. Super bright LED's over stock. dual projector low beam and an awesome sequential turn signal.

Does anybody have expierence with these? I'm thinking about buying one for shorter 1 or 2 night trips. I'm not huge but about 210lbs. Wondering if I'll just end up rolling to the middle and being uncomfortable?

What's everyone doing to make wiring as simple as possible, but also scale as you add more lights/accessories that need power? I really only familiar with SPOD, Switch Pros, Fuse Blocks and upgrading battery terminals... I'm currently running 2 light sources and planning for 2, maybe 3 more...

I had a Roll n Lock Tonneau on my 2G Tacoma. Sold that one and I always hated how I couldnt use the factory rails. Looking at the Fold a Cover. What are the pros/cons for those who have it?

Has anyone been able to fit a bed rack on top of their tonneau cover? I've seen it done before just not sure how i would go about it. Wanting to add a RTT while keeping my tonneau cover on! (Sorry These are the only photos i have currently of my tonneau cover!)

Does anyone make a light bar that matches our factory lights?

Before I go all out on lights I’m trying to figure out if that does anything to the warranty. I called one dealership and they wouldn’t give me a straight answer. I have the platinum warranty package

Just bought a pair of Baja Designs S2 to use as chase lights. I'm wanting to mount them on the back of my KBVoodoo bed rack. Does anyone have any recommendations on what brackets to use? Do any companies offer a bracket specific to this, or can I find something at Home Depot and modify it?

I've been doing some research into bed drawers, mainly the ARB, Goose Gear, Decked and TruckVault. Of course there is always homemade too. What do you guys run? What do you like about it, what not so much? Pictures are a plus! From the looks of things I like the ARB the most so far, but...

I’m thinking of getting the TRD Pro tailights for my 2018 sport. Is there a big difference between the OEM and the Depo brand?

Hi everyone! I drive a 2018 Tacoma sr5, and I’m looking for a bed shell/camper shell. I’m new to the community so I’m not sure about good brands or models. I’m not looking for anything fancy, just standard for a good price. Thanks a lot

What have you guys used for those led lights that sit in the grill. I’ve got the stock grill on a 2018 trd off-road. The only one I’ve found for the stock grill was on yotaleds.com

Curious if anyone is using one of the Kindle Fire tablets for their mapping apps? Since they are android based and cheap, I'm thinking about giving one a try. Thanks

Hey everyone. I just recently installed some ditch lights with a power tray and fuse block but unfortunately I had ordered what I thought was a good wiring harness, but wasn’t. Does anyone have suggestions on a good harness? Thanks,

Wanted to share a project I have been working on. With the help of my close friend and fabricator we made a bed rack for a RTT. So far got the base done. We made the rack to bolt into the stock rail system. The center posts are removable for easy storage if not used. Here is what I'm planning...

I will be looking for 2 to 4 people to test a new bed rack system soon. There will be requirements that will have to be met in order to be one of the ones chosen to test. One of the requirements is that you must live with in a 4 hour radius, (drive time) from San Luis Obispo, CA. in order to be...

So, I've been seeing these getting reviewed by the you-tubers lately so I expect a bunch of free ones got sent out. https://ordinaryoverland.com/shop/mountain-hatch-7bk6l I see how it would be useful to have a flat surface there but I'm not seeing justification for that crazy price. I'm...

I ended up put spaces to lift it off the side rails a bit and I also detached the cross bar and measured because tightening is impossible when it’s on the rack. Hope this helps and people can improve on my design

I'm looking to find out whether hid or led lights work better for the projector housing. I've personally gone through 2 different brand of led lights and they simply changed the color and added no extra visibility. What are the BRIGHTEST kits out there? Something that mimics the Teslas and...

Looking into upgrading the headlights for my 2019 TRD Off Road dcsb. Any thoughts on going Morimoto LED vs Morimoto HID kit? From what I saw on theretrofitsource.com, the kits are about the same in price give or take $20. I just can't stand the yellow bulb lights that are stock. looking for a...

What’s everyone prefer? Need to get some installed...

I get asked about my shell at least once a week. So I figured I'd make a quick video on the most common questions I get on my shell and having a roof top tent. Hopefully it helps someone out. I'm no pro, so cut me some slack on the "um's" and the wind noise. Hahaha View...

Got my fancy tent mounted today, pretty awesome. Question though, do you all forego the mounting hardware and go straight through the rack with washer and bolt? Was trying to find some replacement m8 1.25 in stainless but was thinking just going 5/16. Problem is those aluminium sliders are soft...

Sure this topic has been beaten to death, but I’m about to pull the trigger on a 20”s8 for the bumper and a s2 for a rear facing light on my bed rack. Probably a dumb question but is there anything better out there?

I never paid much attention to them because I always had my 5 gallon jerrycan in the bed of my truck. But now that I have a new bumper and (regrettably?) got the RotopaX mount, I’m seeing some nasty things on Amazon and Google about this product. Specifically, the locking mount sucks and if...

I recently purchased a 10" heretic studios series 6 light bar for the rear of my Prinsu cabrack, unfortunately I cannot find a wiring harness with the length to connect all the pieces. My electrical knowledge is not great but is there a way to extend the wiring or does anyone know of a company...

I was wondering if I am the only one that loads everything but the kitchen sink to go Overlanding or camping, in just average of things that I put in my Tacoma and weight its: Home made bed rack for tent =60 lbs RTT...

Alright boys! What do you think about bed racks!? Whats your opinion on em! Im debating on getting a leitner designs rack. Im planning on making my truck a built out chase truck. And I feel that rack would work perfect for what I have in mind.

Installed a 40” heretic on my prinsu rack and am fairly impressed with it. Looking to get another 20” bar to put behind my Victory slimline bumper. Also looking to do some sort of reverse/camping lights on the back of my Bed rack (front runner). Any recommendations on lights is appreciated...

So it’s a real pain in the ass that the navigation in the Toyota only lets you out coordinates in as north south east and west instead of positive and negative lat Lon, bbbuttttt there’s an app in the truck that lets you use normal coordinates! So this is the garbage setup if you just open...

what would you recommend as the best method to black out/change color of my racks? paint, plasti dip, etc? So i bought my 2017 off-road back in august that was used briefly as a work truck. it came with a set of ladder racks that you can see in my profile pic. This winter i took off the racks...

Looking for a roof rack not the most expensive but not the cheapest any advice 2018 Tacoma double cab

https://tacoma3g.com/threads/communications.8463/ Starting out off-roading during this past year, I have found that having communications on the trail, is super important. It allows you to share issues with your truck, discuss the trail ahead or directions. This write-up is about my hardware...

Starting out off-roading during this past year, I have found that having communications on the trail, is super important. It allows you to share issues with your truck, discuss the trail ahead or directions. This write-up is about my hardware set-up to give others ideas of a low cost option. If...

I went solar on the Tacoma Overland Build. Game Changer Forsure!

Hey, so I made a video of myself unboxing my Smittybilt RTT I got yesterday. Thought it might be helpful. I'm not Rob or Jesse so don't expect much :)

Hey guys, anyone have a Smittybilt rooftop tent? If so hows the quality? I've heard a couple of negative things about it. Just wondering since the price is pretty cheap compared to others. Also, I've noticed the Yakima tents are around the same price but heard negative feedback from those as...

Hi all, I ordered some bare metal bed rack bars and panels. What are some good options for me to paint these at home? What are your thoughts on bed liner? I don't see any reason that wouldn't work personally because they aren't going to be getting thrashed the way a bumper or sliders would.

My local Toyota dealer tells me a ‘19 Tacoma TRD Sport with 3.5 V6 can safely tow my car trailer . Loaded approx. 5800 lbs. Anyone on this forum ever do so with a 3G ? Thoughts ? Thanks for any input.

First off...is that a mirror inside? So I was fiddling around under the hood looking for places to mount a relay and I came across this doo-hickey. Seems like it's the thing that makes the noise when I lock the truck. I'm not entirely sure what else is does. I'm wondering if there is some...

Hi guys. I am new here and to everything off-road related. Just got a 2019 Tacoma DCSB TRD OR and planning to get into off-roading with it. Getting that lift and front bumper with light bar done next month and looking for advise on the light switch panel. Looking at the Cali Raised LED Orem...

where exactly am i allowed to open my RTT?

Hey Guys! Just thought I’d make a post regarding the great deal REI has going right now. The Yakima SkyRise 2, an arguably good RTT is on sale for 31% off (MSRP: $1,099; Sale: $748) and members get an additional 25% off that clearance price. I scored one for $610 out the door, picking it up...

Hello all! I’m looking for a soft topper .. I’ve seen the Bestop ones .. but I feel like those can’t be the only option. Does anyone know of anyone else making these?! Thanks for any input

Quick question, who has TACOMABEAST headlights and put LEDs in them? I bought some online that wouldn’t turn on. Anyone make a switch to LED, what did you use?

Yo, Just seeing if anyone knows of any OEM style switches back lighting that match the dash colors more closely. The one I got from Cali Raised is super dark blue and a lot brighter than the stock ones. I figure they are all like that, but maybe their is one out there or there is a mod for the...

Needs some ideas. Thx!

Just seeing what camper shells people are recommending these days. I’m looking into getting one but don’t want to buy one not knowing what people like or dislike.

Hey guys, I recently installed ditch lights. I went with RUN-D lights off amazon for around $100. Paired with Rago fab low pro brackets. I did research before purchasing, from the $20 auxbeams to $300 kc’s. Very happy with the light output, each are RATED at 2800 lumens. You’ll notice these have...

Hey guys Joe Pinel here, show me your camping kitchens! I am a former cabinet builder and now a current hobbyist, who would appreciate the creative flow. Here is a 4Runner build I started last weekend for a friend. I will be posting up my Tacoma buildout soon!

Hey all, im looking to make a move on purchasing a RTT and a Prinsu Cab rack to mount it to for the upcoming summer. I am looking for some insight on the best RTT for the cost. I was about to buy the Smittybilt Overlanded while it was on sale for $739 but the price jumped back to $899. So feel...

I’m just getting some advise on a 2nd gen camper shell fitting on my 3rd gen Tacoma. I have a friend selling one ridiculously cheap but not sure of the fit.

Figured I'd get a better response rather then the flameage over at TW :-P Anyone ever used the company Quality Light Bar? I know you get what you pay for but sometimes you can get lucky... They've got some really good prices for their bars, I'm just not sure if it's worth it? I know Baja...

not sure if theres a thread for this already but just wanted to get opinions on which one would be better to go with. camper shell or rtt. considering weight, convenience, utility, I know it depends on me too but wanna find out who went from what and why. camper>rtt // rtt>camper

Finishing up my heated seats install today and I have a couple questions. In my fuse box there are two 20 amp fuses, one for heated seats and one for sun roof, I checked them both with a voltmeter with the truck off and they both had 12v going to them. If I were to put my add-a-fuse in one of...

I made stuff for my old truck but most didn't work for my Tacoma because it was specifically made for my Dakota. All of which was sold with the truck. I want to start camping again so I'm starting to make shit for my Tacoma. Figured someone on here might find it interesting it's a little storage...

Picked up some Morimoto amber LED fog lights today, if anyone is interested they’re still running a slight discount with promo code “AmberFTW” (found on another forum). Stoked to see how they turn out! Price came out to around $150 shipped with CA taxes...

Has anybody run solar panels on a roof rack or bed rack for camping usage? Looking into getting a setup or something along those lines just wondering if anyone has done it or have knowledge in that field.

Anyone know of lights that go into the limited 2018 stock grill. Not looking for a light bar that goes underneath but the ones that sit into the grill at the top above the Toyota symbol. Thanks

I've been looking around different threads and haven't been able to find any dedicated to bed platforms for storage or sleeping. Currently waiting on my GFC and been debating numerous options for bed storage or just a simple platform and store totes underneath it. Was curious to see what other...

Have been looking into upgrading my off road light set up and was wondering if anyone had experience installing and using the sPOD touchscreen?

Installed a 30 inch LED light bar from Rough Country. I really like the look of seeing of the light rather than behind the grill. What do you guys think?

I'm considering getting a RTT but I know for sure there's no way my dogs are walking up a ladder. How do you guys get your dogs into your RTT? Is there another way? Thanks!

Looking for opinions on the relentless Fabrication Bed bars. This seems to be one of the more economical options, probably why they say there is such a backlog. Does anyone have experience with these? (edited to reflect the bed bars after I noticed they were a vendor on the site)

Anybody waterproof their light bars? Looking at a decent reviewed/priced light bar off amazon as I hear the 300$+ ones are not as necessary. I've read that you can and should just caulk/silicone the light and waterproof it from either rain, car wash, and condensation. Has anybody done this and...

hi was wondering what is a good bed rack to get ? Thanks

So I just installed the Front Runner Roof Rack tent on my bed and I’m just wondering if any of you know how sturdy it truly is on the bed and if I should get stiffeners? I weigh about 200 and the tent is 90+. Any advice/recommendations would be appreciated, thanks?? (Excuse the mess lol)

I’m looking for advice on getting a headache rack that works with a tonneau cover. I will also need to use a ladder rack at times to Transport kayaks. Is there a combo system or items that work well together. Let me point out that headache rack and tonneau cover are most important. I could put...

Ordered from: http://kustom54lighting.com I just got these installed the other day, which was a like 20 minute ordeal by removing the grill and air guards. I think my only complaint is the lens is not glass, the oem one seems to be glass. (could be wrong i didn't look too close). Other than...

So I a few months ago my ammo cans got jacked and my fancy JT Brooks tire deflators were in there. I didn't want to spend that much again (even though I love them) so I decided to get a cheap deflator. The one I got looked similar to ARB and Smittybilt so I think they may be from the same...

Hey just quick question for everyone anybody have portable water supply I’m thinking of getting one any recommendations? Any suggestions would help thank you.

So, after much thought and discussion I've decided I need to get a canopy for my DCSB. It needs to meet these criteria: - strong enough to hold a RTT and two people in said RTT (and obviously mounting points for RTT) - flush height with truck roofline - front window so my dogs can talk to me...

Hey everyone, Since ive picked up a fridge, i will be adding a 12V outlet with a rocker switch so that i can power the fridge rather than using the 110 inverter that is supplied in the truck bed of my tacoma. I will update this thread when i start the install and get everything wired, my BIG...

Hey guys I’m new to the taco world. I just bought a 2018 dcsb trd sport. It had a remote start already installed on it but I don’t feel like carrying around the extra keyfob. Is there any way the remote start system can be setup to use my phone? I feel like that’s a thing right lol?

What all have y’all done to up the level of gear you can carry? I’m considering the Undercover Swing case. Also contemplating a camper shell.. but thats not in my budget atm. I have the JBL system so I lost 60% behind the rear seat.

And go...

Well I will be doing a Prinsu rack install soon and I will be adding a @Baja Designs S8 light bar. My question is.....how the hell to mount the light bar on the Prinsu rack. The brackets that come with the light bar are to damn short.

Hello everyone. I have been messing around with a project for some time now. I know a lot of us like lights on our trucks, some more than others. I love the TRD Pro grill and never had a second thought of switching to a after market one. However, I do like the look of the back light behind the...

Doing research and wondering if anyone has a DCLB with a canopy and RTT on top of that canopy? Any manufacturers that make canopies strong enough to support a RTT, w/2 people and 2 dogs? Post any pics if you have this setup and/or any recommendations. Thanks in advance!

Anyone here rocking a heavy duty alternator when running a dual battery or Group 31 battery setup?

Looking at both of these and wondering what everyone's thoughts are. The CaliRaised panel is listed @ $199 right now sooooo... If you have one or the other, let me know! Thanks in advance... Caliraised: https://caliraisedled.com/collections/accessories/products/8-switch-panel-power-system...

After spending a week in Australia, I'm hot for a canopy back. Convince me to not buy one.

Drop some pics of your prinus rack set up. About to install my rack and trying to decide what all to order to put on top. ????

Anyone here mount bicycle fork cleat/quick-released to the underside of the OEM bedcover so when folded up you can secure a bike???

Hey All, Anyone have any experience with truck bed tents (like the one from Napier)? I don't have the cash for the nice platform ones... but would love to get off the ground. Any suggestions?

Just uploaded this on Youtube, thought it may be helpful to those shopping for LED lights (y)