• Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!

    Tacoma3G is a beginner-friendly 3rd Generation Toyota Tacoma Forum (2016-2023 model-years). We are a community of people who are focused on good information and good vibes.

What have you done to, or with, your Tacoma today?

  • Thread starter Thread starter MMoreno16
  • Start date Start date
  • Replies Replies 3K
  • Views Views 370K
Forums New posts
Met the folks at Wilco Offroad this morning. great people!!
20180706_080514.webp
20180706_080801.webp
 
Jay said:
He won’t even email me back. He offered me a deal on a rack but I called cbi and they gave me an even better one.
Click to expand...
There was no new news to report. I am trying here, but you need to try to be patient. There are people that have been waiting longer than you... When there was an update, I let you know every time.

I will admit, we are behind on your order. The powder coat company we use is usually a one week turn around, it took them 4 weeks. There is only so much I can do once it is at powder coat. They kept pushing me out and pushing me out too. They told me a week, then another week, then another week and finally brought it to me this morning.

I have been nothing but responsive. You have been emailing me, messaging me on Tacomaworld and Instagram and messaging our Ambassadors which won't really help you much because they aren't running the shop, I am. They all have been messaging me to let me know and I have been telling them the same answer I have been telling you. No offense but eventually I stopped replying to you because every time I stop to tell you the same answer, it puts me more behind on the other 100+ orders I am trying to build and ship.

I emailed you this morning. Your order came back from powder coat at 9am today. I put it on a pallet and FedEx is in route to pick it up.

This delay is an anomaly for us. When it rains it pours. In 6 weeks we had equipment breakdowns, powder coat delays, material delays, and personnel issues internally. We aren't thrilled about being late, just as much as you aren't thrilled about us being late.

EDIT: Sorry. This was a response to @Catfish . I tagged Jay by mistake.
 
Last edited:
0uTkAsT said:
You doing the cutting yourself? I'll be doing mine soon but that part scares the shit out of me, haha.
Click to expand...
I am doing it myself. Just take your time and you’ll be good. The front doesn’t look too bad. The rear bumper was a bit sketchy because the instructions they give you were crap. They give you measurements for the cut, but don’t give you exact places to measure from. They also tell you to bend a tape measure around the fender to get the measurements. All tape measures bend differently. I tried two and came up with two different spots. It came out fine in the end though. Love there bumpers, they just need to work on there instructions. Let me know if you have any questions when your ready to install it.
 
Elp303 said:
I am doing it myself. Just take your time and you’ll be good. The front doesn’t look too bad. The rear bumper was a bit sketchy because the instructions they give you were crap. They give you measurements for the cut, but don’t give you exact places to measure from. They also tell you to bend a tape measure around the fender to get the measurements. All tape measures bend differently. I tried two and came up with two different spots. It came out fine in the end though. Love there bumpers, they just need to work on there instructions. Let me know if you have any questions when your ready to install it.
Click to expand...
What tool did you use to make a smooth cut on the plastic front bumper cover? When I trimmed my flares and inner fender liners, I used a Dremel with plastic cutoff wheels but they kept getting "clogged" with melted plastic and the end result was pretty ugly.
 
0uTkAsT said:
What tool did you use to make a smooth cut on the plastic front bumper cover? When I trimmed my flares and inner fender liners, I used a Dremel with plastic cutoff wheels but they kept getting "clogged" with melted plastic and the end result was pretty ugly.
Click to expand...

I used a 90 degree die grinder with the biggest diameter cutoff wheel I could find. For me the larger diameter cutoff wheels are much easier to control, And they don’t clog up.
 
SDyota_66 said:
Minor mod with the rear Diff breather. And special thanks to my two helpers.

IMG_3616.webpIMG_3613.webpIMG_3614.webpIMG_3584.webpIMG_3612.webpIMG_3619.webp
Click to expand...
I was going to use that same mod ,then i watched this video wich shows how and why water gets into the diff. This mod will not stop the water from being sucked into the diff from the axle seals. I will be getting the more expensive ARB kit but will give better protection.
 
Taco16 said:

I was going to use that same mod ,then i watched this video wich shows how and why water gets into the diff. This mod will not stop the water from being sucked into the diff from the axle seals. I will be getting the more expensive ARB kit but will give better protection.
Click to expand...

I appreciate the video. It provided me with a better understanding of what is actually going on and why the mod is needed. With that in mind, I researched the breather part number used in this mod (90930-03136 Breather Fitting). There seems to be confusion as to if this is a one way or two way breather. As far as I can tell it is the two way breather used for the extended lines in the front of the vehicle, as well as, in the Forerunners. So I feel pretty safe this mod will be okay unless someone can show me it is not a two way breather. Thanks again for the vid.
 
Back
Top