-
Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!
Tacoma3G is a beginner-friendly 3rd Generation Toyota Tacoma (2016-2023 model-years) forum. We are a community of people who are focused on good information and good vibes.
What have you done to, or with, your Tacoma today?
- Thread starter MMoreno16
- Start date
D
Deleted member 643
possibly a ghost :(
Bumped my Icon RXT leafs up to the 3rd stage and threw some new wheels on
Shreducation
2️⃣ Bronze
Added a Kuat Trio rack on to my KB Voodoo Bars Set up. Now can retain the use of the back up camera instead of it being covered the tailgate pad. Im not keen on fork mounts, but its secure and Kuat has a great reputation. Its an extra 10 seconds to throw the wheel back on.
trapHOUZZZ
2️⃣ Bronze
Today was a busy! Took the plastic thing off the front of the Taco, installed Meso Customs Ultimate Turn Signals, and added a black OEM exhaust tip. TRD pro grill came in the mail so I put the front camera on it but didn’t install it on the truck yet.
The pinstripes were installed a couple weeks ago off-roading near Cle Elum lake ?
The pinstripes were installed a couple weeks ago off-roading near Cle Elum lake ?
That's cool. I'm looking forward to checking that out. ?
Nice, you should look into SDHQ's terminal upgrade kit! It will clean up your wiring on the battery.
Nice, what brand is that?
Set up this sick key fob!
I just ordered that yesterday. Haha
Last edited:
SOS Offroad Concepts out of South Carolina
So clean. Nice work
Life has been NUTS lately.
got a new tent/awning installed, Installed a speedometer calibrator (MAKES A HUGE DIFFERENCE) Getting new wheels from @fifteen52 installed tomorrow, installed new fender flares.
All while working a stupid hectic schedule while they love to throw me on different shifts last minute!
all of yalls stuff is looking super clean.
got a new tent/awning installed, Installed a speedometer calibrator (MAKES A HUGE DIFFERENCE) Getting new wheels from @fifteen52 installed tomorrow, installed new fender flares.
All while working a stupid hectic schedule while they love to throw me on different shifts last minute!
all of yalls stuff is looking super clean.
Just put my Meso minimalist fob in to use. Installed my total chaos bed stiffeners. I picked up some KBVoodoo bed rails with tonneau cover brackets off of marketplace. Looking to how I can mount some xbull recovery boards in the bed. And next I will probably be getting a smitty built rtt.
I pulled off my rear bumper covers or caps that are chrome from the factory. I sanded them down with 400 grit and painted with primer and then painted with a black bed liner. They are drying now. Hoping to install later this week. Should look good with the black and the bed liner should hold up a lot better than plasti dip while off-roading.
Removed my Dakar HD springs....
Disassembled them, cleaned them....
Then greased all the bushings and added bicycle inner tube rubber to high friction areas...
Then added an extra D29xl leaf to make my 7 leaf Dakar HD pack an 8 leaf extra HD pack.
Then reassembled them with a new grade 8 center pin with an 8mm Allen key head.
Adding the leaf like this is supposedly an approved addition/modification from OME. Hopefully this will help with some of our sag on longer, loaded down trips.
Disassembled them, cleaned them....
Then greased all the bushings and added bicycle inner tube rubber to high friction areas...
Then added an extra D29xl leaf to make my 7 leaf Dakar HD pack an 8 leaf extra HD pack.
Then reassembled them with a new grade 8 center pin with an 8mm Allen key head.
Adding the leaf like this is supposedly an approved addition/modification from OME. Hopefully this will help with some of our sag on longer, loaded down trips.
Attachments
D
Deleted member 643
possibly a ghost :(
Nice! I just did that with my Icon RXT springs. Little maintenance and they are good as new
They definitely needed a bit of love. Way nicer now.
Shit! Never thought of taking them apart like that. Thx.
Nice work. Did the same, had a hell of a time tracking down interleaf liners, and shims
I'm guessing you tried ARB? Did they not have any?
Cut a hole in the fender to add a snorkel
Sundaymoney524
2️⃣ Bronze
I officially realize today I now need a snorkel. I removed my entire fender liner to make room for the rubber and now my airbox is super exposed. So dorkel it is. ????
Impressive. ?
Today I did a number of things. Installed the new tires and had the alignment done again. Went with Toyo 315/70/17 MT's and immediately had rubbing everywhere. Haha
Then went home and immediately started cutting and banging.
Then installed the S2 Pro side floods, Squadron Pro ditch lights on @ragofabrications brackets, and an RTL-S chase light. All will be wired up tomorrow, but for now it's all show.
Pics tomorrow. ?