-
Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!
Tacoma3G is a beginner-friendly 3rd Generation Toyota Tacoma Forum (2016-2023 model-years). We are a community of people who are focused on good information and good vibes.
What's Your Suspension?
- Thread starter Ron
- Start date
- Replies 99
- Views 16K
- suspension
Bilstein 5100 front and rear
OME 887 Coils
1" Rear block
BFG 285/70/17
OME 887 Coils
1" Rear block
BFG 285/70/17
Do you rub?Bilstein 5100 front and rear
OME 887 Coils
1" Rear block
BFG 285/70/17
A little bit when I'm turning over a bump/dip, either on the inside fender or the cab mount.
How much lift did you get on this kit? Doesn’t look too much higher than stock. That, or i just have the untrained eye?Hi everybody! New to the page! Came across this thread and thought I’d share my rig
2016 Tacoma TRD Sport 4x4
-IconVehicleDynamics 2.5 Stage 1 Lift Kit
-MethodRaceWheels NV 305 17x8.5
-Fallen WildPeak AT3W 265/70/17
The last picture is how my rig currently looks, I removed the plastidip from my fenders due to someone clipping and stripping the dip off one of my fenders
Your rig looks sweet from afar.OME 886 with HS-3 AAL’s and LR uca’s. Gave me 2.5” up front 2” in rear. Pretty happy with this basic suspension. It was 1400$
I just ordered the same wheels in gunmetal gray.Bilstein 5100 front and rear
OME 887 Coils
1" Rear block
BFG 285/70/17
Picked up a super basic kit a little under a year ago.
Bilstein 5100’s Front and Rear
Old Man Emu 887 springs
Maxtrac 1” cast lift blocks
Never really got pre and post measurements, but this how she sits next to a 2nd Gen on 35’s. Yea I know, my Taco is just a baby!
Bilstein 5100’s Front and Rear
Old Man Emu 887 springs
Maxtrac 1” cast lift blocks
Never really got pre and post measurements, but this how she sits next to a 2nd Gen on 35’s. Yea I know, my Taco is just a baby!
Nice! You'll have to send me a photo once their on the truck
Always jealous of the red coil peeking out.Just have the stock FOX’s that come on the pro, they work so well no sense in changing them.
@JerryTaco2.0 you should post your entry-level mod set up
D
Deleted member 643
possibly a ghost :(
Ummm, this? Icon stage 9 with bullet UCA's and 700# coils, stage 2 RXT in 2nd config and stage 3 S2
Oh and no sway bar
Last edited by a moderator:
D
Deleted member 643
possibly a ghost :(
Just kidding. This bc no preload and cheap ass spacer lift bolted to not so cheap kings
My Suspension:
ICON Toyota Tacoma Suspension System - Stage 9
2.5" Extended Travel Remote CDCV Coilovers with ICON 700# Springs
2.5" Extended Travel Remote CDCV RXT Rear Shocks
RXT Multi-Rate Leaf Springs
Billet Aluminum Delta Joint UCA's
ICON Toyota Tacoma Suspension System - Stage 9
2.5" Extended Travel Remote CDCV Coilovers with ICON 700# Springs
2.5" Extended Travel Remote CDCV RXT Rear Shocks
RXT Multi-Rate Leaf Springs
Billet Aluminum Delta Joint UCA's
Icon Stage 10
295/70/17 Toyo R/T
295/70/17 Toyo R/T
That is so sexy. It’s like the cool version of mine.Icon Stage 10
295/70/17 Toyo R/T
Lol, thank you man. Just finished it a couple days ago. Sliders are going in next!
Off-topic, but is that the Front Runner rack?
Sure is! I have the cab & bed rack.
Thanks. It's been on my list for a long time now, though in the photo above it looks a bit higher off your roof than I thought it was.
No problem. It sits about 5” from the roof to the top of the rack. They have an option to slide a camp table underneath which is pretty awesome.
Updated:My Suspension:
ICON Toyota Tacoma Suspension System - Stage 9
2.5" Extended Travel Remote CDCV Coilovers with ICON 700# Springs
2.5" Extended Travel Remote CDCV RXT Rear Shocks
RXT Multi-Rate Leaf Springs
Billet Aluminum Delta Joint UCA's
Added ICON S2 Secondary Shock System - Stage 3 up front installed by @SDHQ OFFROAD.
Also, a few weeks ago, we finally got my ICON bump stops installed and swapped out the 3rd leaf on my ICON RXT leaf pack thanks to @JerryTaco2.0 and @ShankedT4R. We also did the Archive Garage U-bolt flip with ICON striker plates while we were in there.
Last edited: