Thanks! Its durable and prob my favorite upgrade
-
Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!
Tacoma3G is a beginner-friendly 3rd Generation Toyota Tacoma Forum (2016-2023 model-years). We are a community of people who are focused on good information and good vibes.
What have you done to, or with, your Tacoma today?
- Thread starter MMoreno16
- Start date
- Replies 3K
- Views 370K
TravelinJohn
4️⃣ Gold
Great to know! I have been looking at some of tailgate mod options. This one is a lead contender. Thanks for sharing!
For the past couple weeks since purchasing my truck. So far I've added BD fog lights and ditch lights along with Trigger controller six shooter. I had help with wiring. And of course taken off the NFab nerf step bars. Looking good so far! I just got Icon suspension kit recently arrived. Will be putting that on soon.
T
Tape
possibly a ghost :(
0
Last edited by a moderator:
For the past couple weeks since purchasing my truck. So far I've added BD fog lights and ditch lights along with Trigger controller six shooter. I had help with wiring. And of course taken off the NFab nerf step bars. Looking good so far! I just got Icon suspension kit recently arrived. Will be putting that on soon.
That six shooter is
How much weight can the V series hold? Pondering what to do with my bed...After waiting for approximately 12 weeks, I finally got my ARE V-Series! I also put some Lamin-X covers on my fog lights.
TacoDerek
5️⃣ Platinum
I've read that's it's anywhere from 200-500 pounds. I think the dealer told me something closer to 500, but I can remember. I just recall accepting that I'll never come close to what they told me.
All of this is "dynamic" not "static" but I'm not too worried because I don't know how I would even get that much weight up there.
Added TVD vinyl to the wheels. Also did the 3rd rail in the bed, perfect fit.
JCJ
2️⃣ Bronze
Not today but over the past few weeks I’ve been getting some goodies I’ve been waiting on. My sliders a buddy made me and welded on. Also my bestop supertop was installed in that time frame. 700lb springs and the ecgs clamshell bushing just because I had the fronts off to do the springs. I apologize for the slight bro lean, I have a massive cooler in my bed with about 200lbs of ice in it and my fronts haven’t settled yet. Truck is level without the cooler, I swear! 
Attachments
TRDcement_taco19
5️⃣ Platinum
Finally installed 3TPAM from expedition essentials thanks Tyler! 
Finally installed 3TPAM from expedition essentials thanks Tyler!
How was the install? Straight forward? I’m wanting to do this.
T
Tape
possibly a ghost :(
0
Last edited by a moderator:
Hi! Did you have an issue regarding holes not aligning? Is there a certain way to install them?Installed my new Mountain Hatch tailgate insert
After waiting for approximately 12 weeks, I finally got my ARE V-Series! I also put some Lamin-X covers on my fog lights.
I ordered a ARE top as well, I was told 15 weeksAfter waiting for approximately 12 weeks, I finally got my ARE V-Series! I also put some Lamin-X covers on my fog lights.
very niceOpening whitetail season tomorrow morningAR-10 sighted in and ready to go.
I may go with the same top, Them or Prinso
did you loose your Auto light feature with yours. I lost that, and running lights, but both on when all lights are
meat in the freezer, good jobAnd...three hunts, three shots, three does in the freezer. My kids would eat a pound of venison every day if I let them
sure is nice to have a dependable, capable truck.
painted, or wrapsNew stripes.
Took it to get LineX on the front, rear bumpers and rock sliders. The powder coat job I got on them originally was so thin and poorly done that it rusted out in 2 weeks. I think LineX should be easier to maintain. Will post pics when I get it back.
TRDcement_taco19
5️⃣ Platinum
I just YouTube it install was time consuming but every min was fun! Tapping the power for the upper USB port was a bit challenging
