• Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!

    Tacoma3G is a beginner-friendly 3rd Generation Toyota Tacoma Forum (2016-2023 model-years). We are a community of people who are focused on good information and good vibes.

Finally upgraded my tires to pizza cutters

CementTRD

2️⃣ Bronze
Well finally have enough pennys to get the tires I wanted!!! 255/85/16 cooper st-maxx!! Who else is rocking them?
 

Attachments

  • 385DD274-0B06-4125-BD2D-E4F357615138.webp
    385DD274-0B06-4125-BD2D-E4F357615138.webp
    456.2 KB · Views: 1,567
  • 75152C7A-B432-47DC-A90C-69D656E523DC.webp
    75152C7A-B432-47DC-A90C-69D656E523DC.webp
    436.4 KB · Views: 1,167
  • 66079492-336C-4540-A1E3-197AD45D5E32.webp
    66079492-336C-4540-A1E3-197AD45D5E32.webp
    405 KB · Views: 1,178
  • 19F08503-4205-4285-9D4B-9E4BF2E980F3.webp
    19F08503-4205-4285-9D4B-9E4BF2E980F3.webp
    491.4 KB · Views: 1,198
For those interested, I recently installed a set of 255/80/17 Toyo Open Country A/T III with TRD Pro wheels on a fully stock 2019 Sport (no lift). Photo is below. I've also attached a writeup for those looking to dive deeper.

TL;DR - with this wheel/tire combination, there was no rubbing at ride height, but the clearance is close. You'll probably want to do some very simple trimming and molding of the fender to make a bit more space just to avoid the issue. Clearance to the cab mount is fine - no chop needed. Did a stuff test and tire clears cab mount by at least 0.5 inches. Increased ride height by just over an inch. Very happy with the results.

PXL_20210102_214046565_2 (1).jpg
 

Attachments

The pizza cutters look good I just wish there was a 35” pizza cutter in a tire that isn’t a super swamper.
Tyler, check with Lord Humongous about skinny 35s. If I recall correctly I'm pretty sure he was running a set that weren't Swampers.
 
Tyler, check with Lord Humongous about skinny 35s. If I recall correctly I'm pretty sure he was running a set that weren't Swampers.
Since that post I have moved onto regular 35s and now 37s are in my future so pizza cutters will have to wait. Thanks for the heads up though.
 
Back
Top