bigbluetaco
2️⃣ Bronze
Theoretically, if you put a 6" RC/Pro comp/etc kit and add in a 2" coil over lift as the suspension, would you be at 8" total?
-
Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!
Tacoma3G is a beginner-friendly 3rd Generation Toyota Tacoma forum (2016-2023 model-year specific). We are a small community of people who are focused on good information and good vibes. More about us....
Suspension question?
- Thread starter bigbluetaco
- Start date
- Replies 2
- Views 965
- suspension
The coilovers are generally adjustable so at the stock setting with the spacer, it would give you the 6" of lift. But if you are putting in a coilover, you would want to get once built for the 6" lift so that you can eliminate the spacer from the kit. Some of the coilovers can be cranked up a little bit on the 6" lifts to give you 7", but I wouldn't really recommend it. All those components for the drop bracket kits are designed to work in that 6" lift range with a little give or take. at 8" I would worry about wearing out components prematurely.
bigbluetaco
2️⃣ Bronze
thank you, i dont think i would ever do it, but i recently saw a picture of a truck with RC 6 inch lift and bilsteins cranked all the way up, looked massively tall but also useless at the same time....