- Joined
- Jul 14, 2020
- Messages
- 220
- Reaction score
- 225
- Location
- Crested Butte
Magnetic Gray
So I'm in the middle of swapping out coilovers on my 1st gen.
I could get the lower control arm to drop low enough to get the stock spring out, but it wouldn't drop low enough to get the bilsteins back in there.
I loosened up the cam bolts alot, but it still won't drop.
I ordered up some spring compressors.
I also ordered up new top hats too.
I had to take the grinder to one of the shock top bolts.
I got spoiled working on the 2020, no seized bolts or rust.
Will try again after tool delivery.
I did the cv axle first, that went pretty good.
Tricky getting the new one back in, but you fiddle with it long enough and it goes in.
I could get the lower control arm to drop low enough to get the stock spring out, but it wouldn't drop low enough to get the bilsteins back in there.
I loosened up the cam bolts alot, but it still won't drop.
I ordered up some spring compressors.
I also ordered up new top hats too.
I had to take the grinder to one of the shock top bolts.
I got spoiled working on the 2020, no seized bolts or rust.
Will try again after tool delivery.
I did the cv axle first, that went pretty good.
Tricky getting the new one back in, but you fiddle with it long enough and it goes in.