That's kind of a dangerous question. Many times it depends on where in the harness you are trying to tap into the system so be careful. Wire colors are reused. It looks like you are messing with the taillights so I am assuming at the taillights or at least somewhere along the cabin area. I don't have access to confirm your specific year but looked at 2019 and 2021 and they appear mostly the same (2021 shows both a sky blue and blue wire for the stop on the left side which doesn't make any sense).
From EB1 junction (black 12 pin connector in the engine compartment near the battery):
General Illumination: Green
Left Rear Turn: Yellow
Right Rear Turn: Sky Blue
Reverse Lights: Red
Brake Left & Right: from EB1 blue to unlabeled splice then LH Sky Blue, RH Blue