• Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!

    This website is the passion-project of a USMC veteran/mechanic, @Tyler. I created Tacoma3G.com to share my knowledge of this subject with others and to provide like-minded folks with a comfortable space to ask questions and create 'build threads' within our Tacoma Forums. Now, if the format of this website is confusing to navigate for you, or if you're interested in my full mission and T3G's history, check out the Help and About pages.

gaterose build thread

gaterose

4️⃣ Gold
Joined
May 27, 2018
Messages
59
Reaction score
131
Location
San Antonio
2017 TRD OR DCSB Auto
Blazing Blue Pearl
*** I have a tough time keeping this thread up to date so for more mods, updates, and photos check out my Instagram @elgaterose ***

Been watching this forum since it started up and finally got around to creating an account.

Here's my '17 BBP TRD OR 4x4 DCSB

Here she is the day I bought her -
23633323128_041c05a772_b.jpg


And as she sits now on Icon Stage 1 with ET COs, Camburg BJ UCAs, 255/80R17 Ridge Grapplers on 17x9 Raceline Clutch, BAMF Sliders, SSO bumper with 9.5XP, RX350 BHLM Retrofit, and some lights and other goodies

39073305550_b55b65c57b_b.jpg


My IG name is @elgaterose for anyone interested.

My previous builds
'13 Silverado
'03 4Runner
'00 Silverado

The wife's build
'14 4Runner
 
Last edited:
Welcome to T3G! I dig where you have your truck at so far. The tires look beefy stuffed in there too. Any future plans?
 
Thanks guys!

Not anything big for a bit, I just got it in October and have dropped a ton on it. The wife is going to kill me if I spend much more. Next purchase will likely be skids or the OVTune or maybe that Magnuson supercharger if it ever comes out. But those purchases are a ways off right now.

Right now the only things on the table are minor electrical mods like switchback blacked out mirror signals, streamlight, an extra, constant-on 12v outlet, and possibly rock/courtesy lights.

I also put a JL/Kicker system in and made a fuse panel from acrylic for all the electrical accessories.

40636004060_3262ff2766_b.jpg


40636004130_cd09fdd165_b.jpg


28570899468_6a2d713648_b.jpg


28570899598_30f896d4c6_b.jpg
 
Last edited:
I like them a lot, I actually ended up getting about .75-1 mpg better compared to the shorter but slightly wider 265/75R16 C rated Duratracs (these are E rated).

With the Icon COs set how Icon sent them, the driver's side front rubs barely on full turn with a little stuff. I think they're barely rubbing in the front and rear of the tire. They rub more flexing off road but not terrible. I need to crank the driver's side up a little more. The passenger side doesn't rub at all. I don't have any rear lift, I think it's around 1.5-1.75" up front.
 
Added a Homelink mirror from an Infiniti m35. $30 on eBay vs $200+ for the OEM one. Compass, dimming, and homelink work properly and I don't mind the orange compass for the money I saved.
Homelink mirror.jpg
 
Wow looks awesome man! Welcome!
 
Forgot to post the pics from my little off road trip with a couple local guys, 2nd gen Taco and 4th Gen 4R.

28848345707_c25a3fcb17_b.jpg


41976093000_f6d345975b_b.jpg


28850906397_28c3c162c8_b.jpg


43070836934_c1c9b0401d_b.jpg


Video of me not being able to conquer this hill, FWIW I had a coworker's kid in the backseat who was scared half to death so I let off.
 
Wanted to add a couple of interior accessories so it gave me a chance to reorganize some of my wiring.

I decided to trim my fuse panel down, for some reason I was following the Pelfreybilt design and didn’t consider customizing it for my needs. Like access to the fuse box without unbolting the panel...
DC68E9EF-2384-425F-AC55-233C391D8815.jpeg


CAFAF322-8716-4177-9658-9B95AF88E162.jpeg

9E23B971-F6B7-4196-AFB2-860E9BB2930B.jpeg


I also shortened the leads under my seat for my amp/dsp wiring and added a second fuse panel under the seat for the fix86 an extra (anytime) 12v outlet and an anytime dual usb outlet.
3EC2F800-C2A0-499A-B1D2-9104EBE0F9D0.jpeg


Ordered the wrong outlet from mictuning so I’ll have the right one tomorrow, it will replace the Qi charger switch since my phone doesn’t have that and I’ve seen nothing but bad reports about it’s functionality.
 
Minor off road trip this weekend, just mostly minor trails with a couple of 4wd spots

44824016012_7e2875186c_b.jpg


Buddy I was with decided to see if this was deep or not, it was.

43963132545_0332d4e0b0_b.jpg


This picture from July was taken basically out in the middle of where the creek is now.

43070840544_aaf4f9a15a_b.jpg


Yeah we've had a lot of rain in the last few weeks and it was too wet to back out...
43963188405_1beab79535_b.jpg


44823979752_6e21de638d_b.jpg


43963215545_f0700dc3c9_b.jpg


29937622027_c46c3ae084_b.jpg
 
Did some minor off roading this weekend in order to get some sunrise photos. No shots on the way up because it was dark.

30648342337_5bf8305ba0_b.jpg


30648343977_16edf4a664_b.jpg


Went with my 4th gen 4runner buddy

45589403781_a7a5a013a2_b.jpg


44675422235_f087487ab9_b.jpg


45589413161_83a1f9375f_b.jpg


44675433285_b0db5c8704_b.jpg


43771839170_7cd938244d_b.jpg


45589417561_ce67eededb_b.jpg


Dented my engine skid pretty good here but luckily my Mobtown skid arrived the same day
31718888428_3d5feca755_b.jpg
 
Love the truck, two questions though. That front bumper is awesome, could I get a link? My googling has been unsuccessful. Also, was the Homelink mirror plug and play or did you have to do any modding? I'm under the impression it's plug and play.
 
Love the truck, two questions though. That front bumper is awesome, could I get a link? My googling has been unsuccessful. Also, was the Homelink mirror plug and play or did you have to do any modding? I'm under the impression it's plug and play.
Thanks! The bumper is from Southern Style Offroad / SSO. If you decide to order, PM me your email and I can "refer you" to the site then if you buy one they'll give you $100 off and give me a $100 gift certificate :cool:

For the mirror I had to splice the 3 wires, it was extremely easy. You can buy a plug and play one but it's $100+ more. Just search "homelink 2016 tacoma" on eBay for a plug N play one. The one I have is made for an Infiniti I believe.
 
Been a couple months since I updated this so here are recent updates

Mobtown skid trilogy and RCI LCA skids

45790150884_5a114387d1_b.jpg


KC Cyclone rock lights, did not see a reason for an extra switch so they come on with my cargo/bed lights. I suppose we'll have to see how the locations work out. All but the front are tucked slightly above frame rails. The only other option I saw was to go with 8 instead of 6.

45600546165_2528c36ab1_b.jpg


45600547125_cb016849b3_b.jpg


46461907382_d9e192292a_b.jpg


31573868607_db35b12b1a_b.jpg


46514011611_2339f40889_b.jpg


I think they look pretty cool with the acrylic plates I put behind the BAMF logo on my sliders
31573873087_763b771f5d_b.jpg


I also bashed one of my SRQs on a rock ledge and replaced them with Marine SRQ2s diffused (couldn't pass up the price) slightly relocated to a safer position. I plan to try and replace the diffused lens with the clear ones from my old SRQs because the diffused lens really kills the output.

31574027167_051fbd7197_b.jpg
 
How'd you mount those cyclones?
 
How'd you mount those cyclones?
I bought a piece of 1-1/2" AL flat bar from Lowes then cut, drilled, and bent it. I used existing slider mounting bolts. If you don't have sliders, the holes are still there though.
 
After trying the faceplate and mic in a few locations, I finally got my HAM setup finalized. Sorry no picture of the transceiver but it's under the passenger seat screwed to the carpet.

Icom ID-880H
Diamond HRKS Adhesive Mount
Comet SBB-1 Flexible Antenna

[I got the Diamond NR770HRKS, so I also have the Diamond NR770HA in my toolbox if I ever need extra range)

46755581531_c4c23ed8ab_b.jpg


46702754362_b1015ee653_b.jpg

Icom magnetic faceplate mount
46755582481_090d20daaf_b.jpg


46702748392_97fde5f123_b.jpg


Englarged one of the holes for the glovebox shelf and ran the separation cable through there.
46755577311_114cfea225_b.jpg


Here where the antenna cable feeds in, the other wires are for rock lights and the CB antenna cable (I removed the CB for now until I get a smaller radio)
46030541144_c98d5d8a05_b.jpg


Bent the Icom mic holder to match the angle of the radio bezel as this seemed to be the most convenient spot.
46755579471_513a27f6fd_b.jpg


A coworker 3D printed the RJ45 mount for me and I ordered some plugs to fill the hole when I don't need the mic. (Speaking of anyone needs one of these PM me, I had to buy like 50 and only need 1. glad to send you one for the cost of a stamp.)
46030538464_edd5fa07fc_b.jpg
 
Back
Top