Toynado quicksand build

[TOYNADO]

EXTERIOR:

Toytec Boss 2.0
Dakar CS047R Leaf Springs
Tailpipe chopped
Pelfreybilt Front full hoop front bumper w/ Pelfrey fairlead
Pelfreybilt Rear standard bumper (soon to be Pelfreybilt high-clearance dual swing out)
Pelfreybilt Aluminum IFS, Mid, Rear (exhaust reroute) & Gas tank skids
Pelfreybilt Fuseplate w/ 12 circuit fuse block
Pelfreybilt battery cage with Odyssey 31M battery
All-Pro Apex Sliders
ProComp 7036 17"x9" -6 offset
BFG 275/70R/17 KO2's
Warn VR10000-S winch
Baja Designs S8 light bar & Squadron sports amber pods in front bumper
Baja Designs S2 flush pods in rear bumper
Baja Designs Squadron Pro amber pods on Caliraised ditch light brackets
@rrentrop reflective black tailgate inserts
RSI LED's for regular & high beams
Prinsu Cabrac
Plano 108421 on Cabrac
TRED 1100's on Cabrac
Custom Tradesman Truck Top by Access Manufacturing w/ Powertank 8" propane tank mount & Yakima tracks on the roof
Trasharoo
#Beatsonic anytime front camera
@At The Helm 's bedside reinforcements
ARB Snorkel
Wheelers performance +4 extended brake lines

INTERIOR:

Warrior Products door sill protectors
Husky Weather Beater floor mats front & rear
Coverking arid multicam seat covers in the front
Midland 75-822 CB w/ 4' Firestick antenna on C4 Fabrication tailgate mount
Consolevault
Hondo Garage iPhone mount
Snomaster 56D fridge/freezer
OverlandSolar 120 watt 3-panel folding solar kit

 

[Tyler]

This build is sick! Any interior bed photos? Glad to have you at T3G.

 

[Pelfreybilt]

Awesome build. Glad to see it here on T3G

 

[Malcolm]

This is really awesome, love every direction you went

 

[4WheelYoda]

Loving that build!!!

 

[Rob Daman]

You had inspired me to become #HardShellTaco

 

[951_yota]

this build is awesome. One battery for winch and fridge? If so no issues? How long have you ran without a charge

 

[TOYNADO]

This build is sick! Any interior bed photos? Glad to have you at T3G.

Thanks! I made the platform modular - the center slides out in two pieces

 

[TOYNADO]

this build is awesome. One battery for winch and fridge? If so no issues? How long have you ran without a charge

The 31M has powered it no problem for three days without being hooked up but that was just testing. If I’ll be stationary for more than a day I’ll hook it up to solar. At home I have a trickle charger cord sticking out from under my garage door that I plug into a lead off my battery.

I also keep an Antigravity jump pack just in case.

 

[TOYNADO]

this build is awesome. One battery for winch and fridge? If so no issues? How long have you ran without a charge

Here is a pic of my battery/fuse setup. @Pelfreybilt battery cage and fuse plate. (Excuse the dust)

 

[TOYNADO]

A couple pics of the platform I built for behind the driver’s seat. The Snomaster 56D fits perfectly.

 

[TOYNADO]

Put some thin solar panels on the top of the Tradesman using RTV silicone. I was told to use it by someone who did it on their trailer a couple years ago and they are holding strong. Actually an easy instal.

A couple of these:
https://www.amazon.com/gp/product/B013DZWDI0/?tag=tacoma3g-20

One of these:
https://www.amazon.com/gp/product/B013DZWDI0/?tag=tacoma3g-20

This:
https://www.amazon.com/gp/product/B013DZWDI0/?tag=tacoma3g-20

This:https://www.amazon.com/gp/product/B013DZWDI0/?tag=tacoma3g-20

And some 10AWG wire, in-line fuse, and ring terminals coming off the battery. And split loom from controller to the panels.

The controller is attached to my fuse box with 3M double sided heavy duty Velcro

100W is MORE than plenty to keep my battery fullycharged with the small draw from my Snomaster 56D fridge/freezer

The black section of gorilla tape on the tradesman is to keep my fishing reels from chipping paint when I have them in my rack that I can attach to the rails.