Hey all. Got a bunch of stuff lying around my shop from my rig I'd be happy to offload. Most of its OEM parts off my rig that I had replaced with aftermarket part and have been sitting in my father's shop for years. I figure this thread will be up for a while so if its still posted its still for sale. I live down on Long Island, and my dads place is up in Sullivan County, NY, and I split my time between the two. I also tend to travel a bunch all over the NE so I don't mind meeting up it necessary.
If it's a part off my rig, it's a (3rd gen) 2016 TRD Sport, 3.5L auto, short bed, Inferno.
-Oem floor mats (taken out at ~7k miles for Weathertech)- $60 (full set)
-Oem leaf springs + 3" Toytec AAL- $200 (I used these for about 20k miles stock, then an additional 20k with the AAl before I switched, they were great!) These will lift the rear up a bit if you don't compensate the front. Got a little bit of surface rust but they don't squeak at all.
-Spare rim $40 -17" stock spare that came with my Sport from the factory. I've got a matching rim for a spare so it's just sitting.
Oem aluminum crash bar- $50 - oem crash bar from behind the front bumper. Taken off at ~43k miles when I got a full metal front.
-3rd gen OEM grill - $50- the classic "cheese grater" grill from the earlier years of the 3rd gen. It's in pretty good shape since I swapped it out pretty early on
-3rd gen Inferno rear bumper caps- honestly they're pretty scuffed, but I'll just give them to anyone who's got an Inferno and wants them, just get me your favorite 6-pack of beer.
-OEM tow package hitch- $100 - stock hitch off the tow packages. I don't have a pic for some reason. Its got an decent amount of surface rust but it worked great over the years. Only reason I took it off was b.c I installed an aftermarket metal bumper with a hitch integrated.
-OEM spare parts- similar to above, I have these listed on other places, but of any fellow taco owners nearby want 'em, you can have whatever you need from below. This stuff has come off my rig at various points over the years and just stored, and there's too much to go through that I'd rather just give back to the Taco community.
From left to right, top to bottom"
-OEM Sport fog lights
-rear cab handles
-OEM interior front cab light covers
-OEM interior rear cab light cover
-OEM battery tie down
-OEM side mirror signals
-OEM door handles (these are actually from a Camry, but they fit the 3rd gen Tacos perfectly! Have a spare set)
-OEM full set of speakers + tweeters (taken out at ~60k
-OEM passenger side, straight edged, fog light cover (I just have the passenger side for some reason, I don't know what happened to my drivers side)
-OEM center console cup holder (upgraded to a larger one)
-OEM recovery point
-OEM cubby (that small useless one on the left-hand side)
This will be my permanent get rid of/sell thread, so I'll update it semi-consistantly with stuff I don't have need for. Like I mentioned before, I split my time between Long Island and the Hudson Valley, and don't really have a problem meeting up with people in the NE if it's within reason. Most of this stuff is just take-offs when I swap to aftermarket, and I would rather have it go to a fellow enthusiast then just gather dust or go to some yahoo.
If it's a part off my rig, it's a (3rd gen) 2016 TRD Sport, 3.5L auto, short bed, Inferno.
-Oem floor mats (taken out at ~7k miles for Weathertech)- $60 (full set)
-Oem leaf springs + 3" Toytec AAL- $200 (I used these for about 20k miles stock, then an additional 20k with the AAl before I switched, they were great!) These will lift the rear up a bit if you don't compensate the front. Got a little bit of surface rust but they don't squeak at all.
-Spare rim $40 -17" stock spare that came with my Sport from the factory. I've got a matching rim for a spare so it's just sitting.
Oem aluminum crash bar- $50 - oem crash bar from behind the front bumper. Taken off at ~43k miles when I got a full metal front.
-3rd gen OEM grill - $50- the classic "cheese grater" grill from the earlier years of the 3rd gen. It's in pretty good shape since I swapped it out pretty early on
-3rd gen Inferno rear bumper caps- honestly they're pretty scuffed, but I'll just give them to anyone who's got an Inferno and wants them, just get me your favorite 6-pack of beer.
-OEM tow package hitch- $100 - stock hitch off the tow packages. I don't have a pic for some reason. Its got an decent amount of surface rust but it worked great over the years. Only reason I took it off was b.c I installed an aftermarket metal bumper with a hitch integrated.
-OEM spare parts- similar to above, I have these listed on other places, but of any fellow taco owners nearby want 'em, you can have whatever you need from below. This stuff has come off my rig at various points over the years and just stored, and there's too much to go through that I'd rather just give back to the Taco community.
From left to right, top to bottom"
-OEM Sport fog lights
-rear cab handles
-OEM interior front cab light covers
-OEM interior rear cab light cover
-OEM battery tie down
-OEM side mirror signals
-OEM door handles (these are actually from a Camry, but they fit the 3rd gen Tacos perfectly! Have a spare set)
-OEM full set of speakers + tweeters (taken out at ~60k
-OEM passenger side, straight edged, fog light cover (I just have the passenger side for some reason, I don't know what happened to my drivers side)
-OEM center console cup holder (upgraded to a larger one)
-OEM recovery point
-OEM cubby (that small useless one on the left-hand side)
This will be my permanent get rid of/sell thread, so I'll update it semi-consistantly with stuff I don't have need for. Like I mentioned before, I split my time between Long Island and the Hudson Valley, and don't really have a problem meeting up with people in the NE if it's within reason. Most of this stuff is just take-offs when I swap to aftermarket, and I would rather have it go to a fellow enthusiast then just gather dust or go to some yahoo.
Attachments
Last edited: