• Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!

    Tacoma3G is a beginner-friendly 3rd Generation Toyota Tacoma Forum (2016-2023 model-years). We are a community of people who are focused on good information and good vibes.

Ditch lights

taco_triggs

2️⃣ Bronze
Hey guys, I recently installed ditch lights. I went with RUN-D lights off amazon for around $100. Paired with Rago fab low pro brackets. I did research before purchasing, from the $20 auxbeams to $300 kc’s. Very happy with the light output, each are RATED at 2800 lumens. You’ll notice these have 7 leds (cree) vs most others which only have 4. The hardware included is all quality stainless, no blemishes anywhere on either light. Oh and there’s no weird typos throughout the paperwork, which usually means you’ve just bought chinese junk. Would recommend these to anybody! Hid my wiring behind the trim panel, and utilized my factory dummy switch by drilling it out to fit the new switch. Will add night photos soon.
7B4B70B8-4E9E-4761-96B6-A145324F1452.webp
394FE044-085A-40DD-A839-71ED07D9EAF6.webp
725FC06A-3D26-4C81-B156-ECF0C60AF89A.webp
A4B98052-6C17-4F32-AC62-8AA6BA3EB1A8.webp
AC299CF0-557B-48F9-A02F-DA0E89F8B3EB.webp
3F050A35-36BE-4D8B-852E-F6AE02DA8040.webp
9751F8AB-87DE-4E35-B39A-9EC2FA52F95D.webp
857EE4C5-918C-42D4-91F8-D10AC637058A.webp
490C9FAB-F6E9-4FAE-800A-BFFC89600282.webp
 

Attachments

  • 4CCE96B1-0208-4AED-A9D8-110CB9DE6E6F.webp
    4CCE96B1-0208-4AED-A9D8-110CB9DE6E6F.webp
    144.3 KB · Views: 113
Those look really good. When you see the pic of them not installed, they look like they would be really big. Doesn’t look to be the case. I’m checking them out now!
 
Hey guys, I recently installed ditch lights. I went with RUN-D lights off amazon for around $100. Paired with Rago fab low pro brackets. I did research before purchasing, from the $20 auxbeams to $300 kc’s. Very happy with the light output, each are RATED at 2800 lumens. You’ll notice these have 7 leds (cree) vs most others which only have 4. The hardware included is all quality stainless, no blemishes anywhere on either light. Oh and there’s no weird typos throughout the paperwork, which usually means you’ve just bought chinese junk. Would recommend these to anybody! Hid my wiring behind the trim panel, and utilized my factory dummy switch by drilling it out to fit the new switch. Will add night photos soon.View attachment 10115View attachment 10117View attachment 10116View attachment 10118View attachment 10119View attachment 10122View attachment 10123View attachment 10124View attachment 10125


Those look great, how is the light output and warranty on these? I ended up going with KC's but these seem like a good deal for what your getting
 
Thanks fellas! Here’s the light output photos.
First is passenger side, ditch light off.
BD6167A6-5D91-4D0E-9F7B-5A01A725212E.webp
Next is passenger side ditch light ON.
B330FB6B-5F1B-4ADE-B741-AB6E12B70C14.webp

Then only ditch lights on
59A2972E-FE5E-48A3-A81E-38583F82170E.webp
And finally ditch lights, lows and fogs (led) all on.
2BABAF0F-C9F6-4B9D-B7F7-1BA47115483C.webp
??
 
Thanks for the write-up on these! I always try to tell people there's nothing wrong with going this route for some simple lights. If they light shit up, they light shit up. Sure, there are reasons to buy the expensive stuff (which I do anyway), but this works too!
 
Back
Top