Ag taco

[Jay]

Hola mi amigos... Jay your favorite silver taco... Introducing my girl. AG.. aka the silver taco aka Arianna Grande..
She's not the most outrageous build, but here are the current specs.

Current sponsors
Prinsu Design Studio
Baja Designs
Cbi OffroadFab
Falken Tire


Truck:
She's a 2016 TRD Sport 4x4

Suspension:
Old Man Emu 888
Bilstein 5100s
Icon 3 lead progressive
Spc UCAs
SoCal Supertrucks cab mount chop
All of the suspension was purchased from headstrong
https://www.headstrongoffroad.com/store/c126/Bilstein_Kits.html

Armor:
Pelfrey Bilt IFS steel skid plate
Pelfrey Bilt Transmission steel skid plate
Pelfrey Bilt Transfer case steel skid plate
Pelfrey Bilt Sliders with kick out

On Order CBI t3 front with center hoop and t3 rear high clearance with swing out

Wheels and tires
Falken Tires Wild peak 285-70x17
Method Race Wheels mesh 306

Lights:
New hid low beam bulbs
Caliraised switch panel
Cali raised relay holder
Oem style switches
Baja Designs squadron r sport white (spot)
Baja Designs squadron r sport amber (combo/driving)
Waiting for rack and bumper to install
Baja Designs s8 20" white (combo/driving)
Baja Designs RLT

Interior:
Hondo Garage unholley vent mount w/ cb mount
Ram Mount large arm
Ram Mount for large phone

Cb:
Uniden pro 505XL
Fire Stik 4' antenna with tunable tip
Caliraised driver side mount

Engine:
Mbrp stainless exhaust cut back cut back to axel
Afe filter

Bed
Ratchet strap spare tire mount
Relentless Fab Hi-lift mount
Hi-lift Xtreame

Xtream


On order CBI T3 front bumper with short center hoop
Prinsu Design Studio CabRack
TRD Pro tail lights
BHLM custom done by @PROTACO17, @Tyler and myself

 

[Tyler]

Hell yeah! I was waiting for the build thread.

 

[Jay]

Life Goals right here!! Making it on to the cover.

 

[Tyler]

Life Goals right here!! Making it on to the cover.View attachment 596

Dope! I’m gonna add to that about once a week too. Also, if you want to, you can dismiss that big notice at the top of the page by clicking that little X.

 

[Jay]

Latest updates. Changed my cb set up and installed my hilift finally using relentless fab mounts.

 

[Jay]

Swung by pelfrey today and picked up a front runner wolf pack box. Tossed my tow strap took kit and jumper cables in this one. Next to come is my jack and other box for my air compressor and other misc items.

 

[Jay]

Ive been active lately, Installed my full skid plate set from Pelfrey last week and tested them out at Big Bear this past weekend. I also have a new speaker set up for my cb.

 

[AZ_CAVALRY]

Latest updates. Changed my cb set up and installed my hilift finally using relentless fab mounts. View attachment 983

How are these mounts? Pretty sturdy? I am about to order a set for my jack as well.

 

[Tyler]

How are these mounts? Pretty sturdy? I am about to order a set for my jack as well.

When I saw them on his truck last weekend, yes they looked pretty solid. Better than the bungee cords I was using, lol.

 

[Jay]

How are these mounts? Pretty sturdy? I am about to order a set for my jack as well.

Yeah they are solid. I would buy locks for them though.

 

[BernsTaco]

Dude the Ag for silver Tacoma is great! I might copy of my IG handle. Truck looks real beefy too

 

[Jay]

Dude the Ag for silver Tacoma is great! I might copy of my IG handle. Truck looks real beefy too

Bro you can’t steal ag man. Only my science nerds get it. The one and only

 

[BernsTaco]

Bro you can’t steal ag man. Only my science nerds get it. The one and only

I meant copy it but realized it’s the metal on the element table not the color mine is white

 

[Jay]

I meant copy it but realized it’s the metal on the element table not the color mine is white

Nobody ever gets it. But it’s so great. Plus it’s my truck build instagram handle.

 

[Jay]

Finally got my Pelfreybilt sliders installed today.

 

[Tyler]

They look dope. Install was easy?

 

[Jay]

They look dope. Install was easy?

It’s silly how easy it was. Even with full skids

 

[Jay]

ALRIGHT!!! So many of you may know I've been whoring my truck out for the greater good of science... I now have Baja Designs, CBI, Prinsu, and Falken tire as sponsors. so every one be ready for the beginning of september when all my CBI armor shows up.
A few bd lights are on and my cab rack will be here next week. stay tuned for the most fun shit I've ever done

 

[0uTkAsT]

ALRIGHT!!! So many of you may know I've been whoring my truck out for the greater good of science... I now have Baja Designs, CBI, Prinsu, and Falken tire as sponsors. so every one be ready for the beginning of september when all my CBI armor shows up.
A few bd lights are on and my cab rack will be here next week. stay tuned for the most fun shit I've ever done

Super jealous!! And I call dibs on your silver bumper caps when you are ready to get rid of them

 

[Jay]

Super jealous!! And I call dibs on your silver bumper caps when you are ready to get rid of it

I will pack them in my bag when I come down to sd in october and I'll have my girlfriend bring them to az for you. Also, you would have no problem whoring out your truck

 

[solscooter]

ALRIGHT!!! So many of you may know I've been whoring my truck out for the greater good of science... I now have Baja Designs, CBI, Prinsu, and Falken tire as sponsors. so every one be ready for the beginning of september when all my CBI armor shows up.
A few bd lights are on and my cab rack will be here next week. stay tuned for the most fun shit I've ever done

Whore

 

[0uTkAsT]

I will pack them in my bag when I come down to sd in october and I'll have my girlfriend bring them to az for you. Also, you would have no problem whoring out your truck

Awesome, I'd appreciate that! Or you can box them up and I'll PayPal you some money to ship them or something.

Did you just get in contact with them and plead your case or what? Because I need me some CBI bumpers. Hell, I need some CBI everything. And I'm on my 3rd set of Falkens in 2 years so I feel like they should pretty much sponsor me out of pity.

 

[Jay]

Awesome, I'd appreciate that! Or you can box them up and I'll PayPal you some money to ship them or something.

Did you just get in contact with them and plead your case or what? Because I need me some CBI bumpers. Hell, I need some CBI everything. And I'm on my 3rd set of Falkens in 2 years so I feel like they should pretty much sponsor me out of pity.

Well sort of. I rendered up my truck and sent it to them. Told them about social media and the forum, basically said I’ll put your logo on my truck, tag you in everything and post what I get. Some go for it. Some don’t even respond.

 

[0uTkAsT]

Well sort of. I rendered up my truck and sent it to them. Told them about social media and the forum, basically said I’ll put your logo on my truck, tag you in everything and post what I get. Some go for it. Some don’t even respond.

Right on! So the ones who've agreed just give you a discount to buy direct or something? Honestly I've never even thought about doing it but it might be about time.

 

[Jay]

Right on! So the ones who've agreed just give you a discount to buy direct or something? Honestly I've never even thought about doing it but it might be about time.

Correct so once I email them they transfer me to a person that handles all the sponsorship deals and we go from there. Mike from cbi is super nice and super helpful. I spoke with him and Nathan the owner about teaming up. Possibly having my truck with them at the overland expo

 

[0uTkAsT]

Correct so once I email them they transfer me to a person that handles all the sponsorship deals and we go from there. Mike from cbi is super nice and super helpful. I spoke with him and Nathan the owner about teaming up. Possibly having my truck with them at the overland expo

That's awesome! I've talked to Nathan before at Overland Expo and I'm glad I held off at the time because it would've been a bitch to swap the bumpers over when I traded it, but I plan to keep this truck for a long ass time so I need to pull the trigger on more armor soon.

 

[Jay]

That's awesome! I've talked to Nathan before at Overland Expo and I'm glad I held off at the time because it would've been a bitch to swap the bumpers over when I traded it, but I plan to keep this truck for a long ass time so I need to pull the trigger on more armor soon.

That was my thinking. Spend it now enjoy it for a long ass time later. Plus I have a turbo 72 nova build going on so the faster I finish this the faster I can blow my money on there

 

[Jay]

Current status of the taco
Cbi armor has been installed
The tepui is now over the bed rather than on top

If anyone has questions about the install please ask. Cbi includes no instructions and if you ask them for the instructions they are so minimal cutting took forever
Overall I really like the bumpers and the rack
I will be changing the suspension soon to hold up over time to the weight
Meso jdm interior light is insane
And all the new Baja design lights are great.

 

[Tyler]

Your truck looks so good with the bumpers.