TRD Stock Wheel Offset - Pro / Off-Road / Sport

[Tomahawk Dog]

Correct me if I am wrong, please!
But I have a question.

Pro = 16" wheel +4 offset with 7" width
Off-Road = 16" wheel + 30 +25 offset with 7" width (corrected -By drizzoh)
Sport = 17" wheel+30 offset with 71/2" width

On the Sport, where is the extra 1/2" placed?
Is it split from center line,..... or all on the backspacing?
(I think backspaced towards the UCA)

FYI,....
(25mm = about a 1")
(30mm = about a 1 1/8")

 

[drizzoh]

Offroad is 16x7 +25mm

 

[Tomahawk Dog]

Offroad is 16x7 +25mm

So the Sports +5 must be going to the UCA,...... that makes sense.

 

[bonifacio]

1/2" or whatever difference is centered. You wouldn't take backspacing or offset into consideration.

Then you have your wheel width. Half point of the wheel would be your center.

0 offset is your flat mounting face lined up to your center line.

So as the wheel gets wider, the difference is split on both sides.

Offset would only move the entire wheel further out or in from center.

PS'd a piktorr for 7" to 8".

 

[bonifacio]

Derp. My mind is just all over the place. Yeah backspaced towards. You're right.