• Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!

    This website is the passion-project of a USMC veteran/mechanic, @Tyler. I created Tacoma3G.com to share my knowledge of this subject with others and to provide like-minded folks with a comfortable space to ask questions and create 'build threads' within our Tacoma Forums. Now, if the format of this website is confusing to navigate for you, or if you're interested in my full mission and T3G's history, check out the Help and About pages.

Pelfreybilt ::: 3rd Gen Tacoma - Dual Swingout Rear Bumper ::: Pre-Order SPECIAL

Status
Not open for further replies.

Pelfreybilt

pelfreybilt.com
Tacoma3G O.G.
Joined
May 4, 2018
Messages
108
Reaction score
210
16-tacoma_long_032918-jpg.2699514



Pelfreybilt ::: 3rd Gen Tacoma - Dual Swingout Rear Bumper ::: Pre-Order SPECIAL
AVAILABLE IN STANDARD AND HI-CLEARANCE OPTIONS
- Dual Swing Arms (NOT available in single gate)
- Fold Down Table (passenger side, inside gate)
- Dual Antenna Mounts
- Hi-Lift Mount
- Reverse Light Cutouts (for Baja Designs S2 Flush Mounts. filler plates are included)
- Spare Tire Carrier
- Backup Camera Relocation (for your stock camera)
- Flip Up License Plate Mount (covers hidden rear hitch)
- Hidden Rear Hitch (bumper requires removal of stock hitch)
- (2) Mounting Plates allowing installation of any 2 mounts we offer (propane, CO2, NATO can, Rotopax) mounts sold separately
- Backup Sensor Cutouts (plugs includes for those without)
- Completely Sealed Bearing Hinges (no maintenance required)
- Lockout Pins & Internal Stops (prevents gate from opening too far and damaging vehicle)

Standard - $1620 ($1924 Powder Coated)*
Hi-Clearance - $1825 ($2186 Powder Coated)*
*Pricing may change very slightly. If pricing does change Pelfreybilt will contact you directly


WEIGHT
Standard (135-145lbs)*
Hi-Clearance (180-190lbs)*
*Production weights may vary


LEAD TIMES
12-14 weeks once production is started.


PRE-ORDER DETAILS
As part of the Pre-Order we are offering a SPECIAL deal for members. Members will receive:
- Exclusive T3G Swag Pack
- Priority Ordering (Receive your bumper a few months before standard orders)
- Discounted Pricing on mounting solutions

Email your FULL NAME, PHONE #, ADDRESS, and BUMPER (standard or hi-clearance) to michael@pelfreybilt.com. Please include subject "T3G REAR BUMPER".
If you would like any mounting solutions please check them out here, and include details in your email to Michael.


FAQ
Q - If I order my bumper today (6/20) when should I expect to see it?
A - THE BUMPERS ARE STILL IN THE DEVELOPMENT STAGE. WE HAVE DONE ALL OF OUR DESIGNS IN OUR CAD PROGRAM, WE HAVE DONE OUR STRESS ANALYSIS AND NOW HAVE TO BUILD AND TEST A PROTOTYPE IN THE REAL WORLD APPLICATION. THIS WILL TAKE ROUGHLY 6 WEEKS AND THEN IT WILL GO INTO PRODUCTION. ONCE PRODUCTION STARTS 12-14 WEEKS.

Q - Will you email us if the pricing changes?
A - ABSOLUTELY! WE DON'T EXPECT IT TO CHANGE, BUT THERE IS ALWAYS THE CHANCE SOMETHING CHANGES DURING PROTOTYPING. A SMALL COMPONENT CHANGE COULD IMPACT THE PRICE SLIGHTLY.

Q - Should we call or email if we need to change our order?
A - EMAIL WOULD BE PREFERRED (michael@pelfreybilt.com)


-Pelfreybilt
www.pelfreybilt.com
16-tacoma_long-1_032918-jpg.2699513
 
Last edited:
Important question, with the back up sensors....I have heard of issues with them no longer working after installing them on aftermarket bumpers, would you be able to advise?
 
Important question, with the back up sensors....I have heard of issues with them no longer working after installing them on aftermarket bumpers, would you be able to advise?

The bumper includes cutouts for the backup sensors. In our current offerings we haven't experienced issues with the sensors. Sometimes people can pinch a wire or accidentally damage a sensor, but it's not common.

-Pelfreybilt
www.pelfreybilt.com
 
Important question, with the back up sensors....I have heard of issues with them no longer working after installing them on aftermarket bumpers, would you be able to advise?
Keep in mind the back up sensors have a horizontal alignment, I ran into this on my after market bumper. I just needed to rotate them to get them all working.
 
Keep in mind the back up sensors have a horizontal alignment, I ran into this on my after market bumper. I just needed to rotate them to get them all working.
That’s what I was wondering, I heard one guy on TW that had to go get them recalibrated at the factory.....don’t want to pay to have that done.
 
Sweet. Can't wait for mine. Email sent.

-Matt
 
16-tacoma_long_032918-jpg.2699514



Pelfreybilt ::: 3rd Gen Tacoma - Dual Swingout Rear Bumper ::: Pre-Order SPECIAL
AVAILABLE IN STANDARD AND HI-CLEARANCE OPTIONS
- Dual Swing Arms (NOT available in single gate)
- Fold Down Table (passenger side, inside gate)
- Dual Antenna Mounts
- Hi-Lift Mount
- Reverse Light Cutouts (for Baja Designs S2 Flush Mounts. filler plates are included)
- Spare Tire Carrier
- Backup Camera Relocation (for your stock camera)
- Flip Up License Plate Mount (covers hidden rear hitch)
- Hidden Rear Hitch (bumper requires removal of stock hitch)
- (2) Mounting Plates allowing installation of any 2 mounts we offer (propane, CO2, NATO can, Rotopax) mounts sold separately
- Backup Sensor Cutouts (plugs includes for those without)
- Completely Sealed Bearing Hinges (no maintenance required)
- Lockout Pins & Internal Stops (prevents gate from opening too far and damaging vehicle)

Standard - $1620 ($1924 Powder Coated)*
Hi-Clearance - $1825 ($2186 Powder Coated)*
*Pricing may change very slightly. If pricing does change Pelfreybilt will contact you directly


WEIGHT
Standard (180-190lbs)*
Hi-Clearance (135-145lbs)*
*Production weights may vary


LEAD TIMES
12-14 weeks once production is started.


PRE-ORDER DETAILS
As part of the Pre-Order we are offering a SPECIAL deal for members. Members will receive:
- Exclusive T3G Swag Pack
- Priority Ordering (Receive your bumper a few months before standard orders)
- Discounted Pricing on mounting solutions

Email your FULL NAME, PHONE #, ADDRESS, and BUMPER (standard or hi-clearance) to michael@pelfreybilt.com. Please include subject "T3G REAR BUMPER".
If you would like any mounting solutions please check them out here, and include details in your email to Michael.


FAQ
Q - If I order my bumper today (6/20) when should I expect to see it?
A - THE BUMPERS ARE STILL IN THE DEVELOPMENT STAGE. WE HAVE DONE ALL OF OUR DESIGNS IN OUR CAD PROGRAM, WE HAVE DONE OUR STRESS ANALYSIS AND NOW HAVE TO BUILD AND TEST A PROTOTYPE IN THE REAL WORLD APPLICATION. THIS WILL TAKE ROUGHLY 6 WEEKS AND THEN IT WILL GO INTO PRODUCTION. ONCE PRODUCTION STARTS 12-14 WEEKS.

Q - Will you email us if the pricing changes?
A - ABSOLUTELY! WE DON'T EXPECT IT TO CHANGE, BUT THERE IS ALWAYS THE CHANCE SOMETHING CHANGES DURING PROTOTYPING. A SMALL COMPONENT CHANGE COULD IMPACT THE PRICE SLIGHTLY.

Q - Should we call or email if we need to change our order?
A - EMAIL WOULD BE PREFERRED (michael@pelfreybilt.com)


-Pelfreybilt
www.pelfreybilt.com
16-tacoma_long-1_032918-jpg.2699513

Confirm weights on these things usually the HC is heavier. Am I wrong?
 
Order placed! Email sent
 
I chose to go with dual NATTO can mount. Standard bumper style cant bring myself to cutting up the bed! Even though i like the Hi clearance better. It was tough enough cutting the front bumper for the SSO slime line winch bumper and now i may go with a new pelfrey front bumper!
 
I chose to go with dual NATTO can mount. Standard bumper style cant bring myself to cutting up the bed! Even though i like the Hi clearance better. It was tough enough cutting the front bumper for the SSO slime line winch bumper and now i may go with a new pelfrey front bumper!
just start lopping shit off.
 
Status
Not open for further replies.
Back
Top