• Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!

    This website is the passion-project of a USMC veteran/mechanic, @Tyler. I created Tacoma3G.com to share my knowledge of this subject with others and to provide like-minded folks with a comfortable space to ask questions and create 'build threads' within our Tacoma Forums. Now, if the format of this website is confusing to navigate for you, or if you're interested in my full mission and T3G's history, check out the Help and About pages.

RCI Rear bumper install

Hunter399

5️⃣ Platinum
Rig of the Month
Tacoma3G Supporter
Tacoma3G O.G.
Joined
Feb 8, 2019
Messages
182
Reaction score
371
Location
Salt Lake City, Utah
2018 TRD OR DCSB Auto
White
Installing my rear RCI bumper in the upcoming days and had a few questions. I know I will lose the radar BSM. I assume it’s just disconnected and you zip tie up the harness. I also am wondering how to transfer over the back up sensors. Unable to find any info on removal of the sensors from stock to the new bumper. Probably overthinking all of this just researching prior to diving in.

Thanks for the help!
 
Your not overthinking it. The clips are kind of difficult to get at, especially the outermost ones. I still haven't finished mine for this exact reason. Sadly I don't actually have the answers you need as I need them myself.
 
Installing my rear RCI bumper in the upcoming days and had a few questions. I know I will lose the radar BSM. I assume it’s just disconnected and you zip tie up the harness. I also am wondering how to transfer over the back up sensors. Unable to find any info on removal of the sensors from stock to the new bumper. Probably overthinking all of this just researching prior to diving in.

Thanks for the help!
Were you ever able to transfer them over? I'm installing mine now.
 
Yes I was. Getting them out of the plastic bumper is the hardest. I just turned them a half to a quarter turn and angled them out. Then installing them was way easier. Just angle them in and they snap in. One of mine was a hair loose fitting and used a dab of black silicon to secure it better. I need the same for the license plate lights.
 
Last edited:
Back
Top