• Welcome to Tacoma3G.com, a free resource for 2016-2023 Toyota Tacoma owners!

    This website is the passion-project of a USMC veteran/mechanic, @Tyler. I created Tacoma3G.com to share my knowledge of this subject with others and to provide like-minded folks with a comfortable space to ask questions and create 'build threads' within our Tacoma Forums. Now, if the format of this website is confusing to navigate for you, or if you're interested in my full mission and T3G's history, check out the Help and About pages.

New Bilsteins

TacoSlinger4000

2️⃣ Bronze
Joined
May 23, 2018
Messages
29
Reaction score
48
Location
FL
2016 SR5 AC Auto
White
Just got my 5100s in the mail. I went with the old part #24-239370 bc of the 1.75 setting. Anyway I noticed one of the shocks already has rust on it. Any cause for concern? I’ve been waiting a while for these so really I don’t want to send them back if the concern is only cosmetic.
D14F7EEC-6B49-46EF-AA0E-EA83E5FED1B6.jpeg
92959C15-9EE8-4C78-8E7B-2485FD0535DF.jpeg
 
Just got my 5100s in the mail. I went with the old part #24-239370 bc of the 1.75 setting. Anyway I noticed one of the shocks already has rust on it. Any cause for concern? I’ve been waiting a while for these so really I don’t want to send them back if the concern is only cosmetic.
D14F7EEC-6B49-46EF-AA0E-EA83E5FED1B6.jpeg
92959C15-9EE8-4C78-8E7B-2485FD0535DF.jpeg
No concern a scotch pad or wire brush will clean it up
They usually cover with some oil prior to packaging to prevent surface rust
 
Different than mine but I thought I had the same version.
F1348AF4-BC17-4771-B151-FDD03F86538D.jpeg


I think mine must be a longer version. Im asking because one of my boots came warped pretty bad.
Damn you did the whole thing that I eventually want to do! I have the old Bilstein part # for the second gens. Did you send them back bc the boot was warped?
 
Damn you did the whole thing that I eventually want to do! I have the old Bilstein part # for the second gens. Did you send them back bc the boot was warped?
I didn’t send them back because I didn’t want to wait. I needed to install it ASAP because I was too excited. It’s on my truck looking twisted as hell and I can’t stand it. I guess I could try sending them photos and see what happens.
 
That surface rust is no big deal. Clean it off and let her rip. I got the 3rd gen 5100's and reused stock coils set up one clip just to level, but now I'm thinking OME 887's and Icon 1.5 AAL are soon to be in order!
 
Insanely jealous of your setups..I told myself that after these 5100’s then I am defenitely done for a while. But now I really want new springs, uca’s, aal. Seems like the second I’m satisfied then I immediately want something else.
 
bilsteins set at 1.75 pairs with original springs. Off to alignment tomorrow.
Measurements from center hub to fender

BEFORE:
- front driver: 20 1/2
- front passenger: 20 1/2
- Rear driver: 22
- Rear passenger: 22 1/8

AFTER:
- front driver: 22 3/8
- Front passenger: 22 1/4
- Rear driver: 22 1/8
- Rear passenger: 22 1/8

Overall 1/8 of bro lean but I’m waiting for them to hopefully settle.
547FF070-CA4F-43C3-BA02-CE3CAD8CDFD1.jpeg
 
Insanely jealous of your setups..I told myself that after these 5100’s then I am defenitely done for a while. But now I really want new springs, uca’s, aal. Seems like the second I’m satisfied then I immediately want something else.
It really never ends.
 
Back
Top